Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 05-11-2013, 08:30 PM
greenmonster304's Avatar
greenmonster304 greenmonster304 is online now
LawnSite Silver Member
 
Join Date: Jul 2007
Location: La La Land
Posts: 2,303
pics from the week

the first group is a site that will have two systems on for the veggie garden (3rd pic) and one for the landscape.

the other pics are from a site that we went to last night to adjust the clock but we had no water. i discovered that the guy who i hired as a service tech (who quit) hooked the pump start relay control wire to the valve test terminal instead of the P/MV terminal. So it sent power to the pump constantly and it dead headed and melted the threads on the drop pipe and the pump fell off. we were able to pull it out by the wires and reset the pump.
Attached Images
             
Reply With Quote
  #2  
Old 05-11-2013, 09:48 PM
1idejim's Avatar
1idejim 1idejim is online now
LawnSite Fanatic
 
Join Date: Jul 2009
Location: State of Jefferson
Posts: 6,359
Gotta lub employee's GM

Posted via Mobile Device
Reply With Quote
  #3  
Old 05-11-2013, 11:07 PM
CAPT Stream Rotar's Avatar
CAPT Stream Rotar CAPT Stream Rotar is offline
LawnSite Fanatic
 
Join Date: Apr 2007
Location: Cape Cod, Ma
Posts: 5,353
very tight clocks GM.

how are you getting those 120V?
Reply With Quote
  #4  
Old 05-12-2013, 08:13 AM
greenmonster304's Avatar
greenmonster304 greenmonster304 is online now
LawnSite Silver Member
 
Join Date: Jul 2007
Location: La La Land
Posts: 2,303
Quote:
Originally Posted by CAPT Stream Rotar View Post
very tight clocks GM.

how are you getting those 120V?
The electrician will be hard wiring them to the panel.
Reply With Quote
  #5  
Old 05-12-2013, 09:04 AM
CAPT Stream Rotar's Avatar
CAPT Stream Rotar CAPT Stream Rotar is offline
LawnSite Fanatic
 
Join Date: Apr 2007
Location: Cape Cod, Ma
Posts: 5,353
I really wish my boss would start getting into that and away from those ugly pigtails/extension cords.
Reply With Quote
  #6  
Old 05-12-2013, 05:55 PM
stebs stebs is offline
LawnSite Member
 
Join Date: Jun 2010
Location: Eastern KS
Posts: 166
Quote:
Originally Posted by greenmonster304 View Post
The electrician will be hard wiring them to the panel.
I assume he will be pulling his wire into a separate conduit than your low voltage wire?
Reply With Quote
  #7  
Old 05-12-2013, 06:41 PM
Mike Leary's Avatar
Mike Leary Mike Leary is online now
LawnSite Fanatic
 
Join Date: Mar 2007
Location: Alpine, Arizona
Posts: 20,496
Quote:
Originally Posted by stebs View Post
I assume he will be pulling his wire into a separate conduit than your low voltage wire?
And using grey conduit pipe, I would hope. We've cut-thru white pipe and poly only to find wire that could have fried us.
Reply With Quote
  #8  
Old 05-12-2013, 06:57 PM
Wet_Boots's Avatar
Wet_Boots Wet_Boots is online now
LawnSite Fanatic
 
Join Date: Mar 2005
Location: metro NYC
Posts: 39,052
A disconnect box would be the best of both worlds. Hard-wired, with an ability to "pull the plug" if ever need be.
Reply With Quote
  #9  
Old 05-12-2013, 07:24 PM
greenmonster304's Avatar
greenmonster304 greenmonster304 is online now
LawnSite Silver Member
 
Join Date: Jul 2007
Location: La La Land
Posts: 2,303
The big metal box to the right is a breaker panel, each clock will have its own circuit breaker.
Reply With Quote
  #10  
Old 05-12-2013, 07:39 PM
Wet_Boots's Avatar
Wet_Boots Wet_Boots is online now
LawnSite Fanatic
 
Join Date: Mar 2005
Location: metro NYC
Posts: 39,052
that works, too
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:45 PM.

Page generated in 0.08368 seconds with 10 queries