search sponsored by:
Advanced Search

The Green Industry's Resource Center

Prev Previous Post   Next Post Next
Old 06-08-2013, 11:23 AM
Bob MacGregor Bob MacGregor is offline
LawnSite Member
Join Date: Jul 2012
Location: Oakdale, CT
Posts: 181
Several recommendations when operating X-ONE

Hi Troops,
Having recently serviced my X-ONE, I have several recommendations.
About 3 1/2 quarts of hydraulic will drain from the reservoir when replacing the hydraulic oil filter. With the rear discharge deck in the lowest position, I was able to get a regular plastic oil drain pan under the reservoir and get it out without spilling any oil. The next time that I do this service I will warm up the machine and using an oil withdrawal system, remove the oil from the reservoir before removing the filter.
Also not good to run a fuel tank out of fuel as getting fuel to flow after refilling the tank can take time. Watch the fuel gauges and don't let it happen. The fuel evaporative system, part of which is installed in the fuel tanks, is the reason for the slow return of fuel flow following running out of fuel. This is not a negative comment, just a caution to operators.
Fuel tank caps can easily get cross threaded when putting them back on, just be careful when reinstalling them.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:14 PM.

Page generated in 0.06054 seconds with 9 queries