Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 06-21-2013, 02:11 PM
ricky86 ricky86 is offline
LawnSite Bronze Member
 
Join Date: Aug 2008
Location: Monmouth Cty N.J.
Posts: 1,174
Dand post the pictures. There's a lot of wrong info getting posted in this thread. The fish is correct. The other guy...... not so much.
Reply With Quote
  #12  
Old 06-21-2013, 05:04 PM
Danb Danb is offline
LawnSite Member
 
Join Date: Jun 2013
Posts: 7
Here you go. The deck is rough, but I got the whole mower for free so I dont feel bad about putting a little money to it.



Reply With Quote
  #13  
Old 06-21-2013, 10:56 PM
ricky86 ricky86 is offline
LawnSite Bronze Member
 
Join Date: Aug 2008
Location: Monmouth Cty N.J.
Posts: 1,174
Get some pictures of the deck. Are all 3 spidles the same? And are you located in the US?
I'm stumped. Only thing I can think of it's an import deck???? Where is that Toro rep when you need him?????????? More pic's It's gotten personal.
Reply With Quote
  #14  
Old 06-21-2013, 11:30 PM
zturncutter's Avatar
zturncutter zturncutter is offline
LawnSite Bronze Member
 
Join Date: Feb 2003
Location: Interior South Florida
Posts: 1,187
www.J-Thomas.com

Spindle parts Toro # - 46-8530, 253-139,27-092, 51-3551
Spindle parts J-Thomas # - JT-9840, TO-139, TO-0920, TO-106
Center Pulley - Toro 55-7610, J-Thomas - TO-115
__________________
ZTurnCutter
Reply With Quote
  #15  
Old 06-22-2013, 03:29 AM
ricky86 ricky86 is offline
LawnSite Bronze Member
 
Join Date: Aug 2008
Location: Monmouth Cty N.J.
Posts: 1,174
They are the right parts for a six bolt mount spindle.
Reply With Quote
  #16  
Old 06-22-2013, 08:58 AM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,513
Quote:
Originally Posted by ricky86 View Post
Can you post a picture of it? The deck was made from 1984 till 1998 with few if any variations. I've never seen a Toro SFS spindle with 4 bolt mount. Somethings not right.
I've not ran across a 4 bolt spindle/deck either. Obviously, Toro at one point made em though, huh?
You say its junk, but it might be possible to rebuild it, no?

You may have to get creative and find a shop with an Oregon catalog and match up yer old one. A paper catalog is best. Other vendors may have dimensioned drawings in their cat. also.

Spindles aside, you need to repair the rusted out deck! Them spindle mounting areas look worse than the floor pans on my old VW.!
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!
Reply With Quote
  #17  
Old 06-22-2013, 10:40 AM
Danb Danb is offline
LawnSite Member
 
Join Date: Jun 2013
Posts: 7
I live in Mass. I know I need to repair the spindle mount. It's on the list. The old spindle is junk. No amount of heat would pull the old pulleys off so I had to cut them off which ruined the spindle. The spindles mount the same except the center one has two pulleys on it.
Posted via Mobile Device
Reply With Quote
  #18  
Old 06-22-2013, 01:15 PM
Danb Danb is offline
LawnSite Member
 
Join Date: Jun 2013
Posts: 7
This one looks like it may work. Parts tree says its for a 42" deck but it looks the same.

http://www.j-thomas.com/Portal.aspx?...R=C56A627F4F11
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:01 AM.

Page generated in 0.06980 seconds with 9 queries