Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #35  
Old 07-26-2013, 10:19 AM
WrightCommercial WrightCommercial is offline
Sponsor
 
Join Date: Apr 2008
Location: Frederick, MD
Posts: 507
Cut It Close,

Now that the baffle is in the deck which blades are you running in the deck? The older decks with the baffle would usually perfrom the best when the blade height is half above the baffle and half below which should be the set with the two spacers. Removing one spacer is okay you just don't want the whole blade up in the baffle, remember that the cut height will be 1/4" higher then the system indicator.

Best Regards
Wrigth Mfg.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:44 AM.

Page generated in 0.18996 seconds with 9 queries