Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 07-30-2013, 09:37 PM
snnoopy's Avatar
snnoopy snnoopy is offline
LawnSite Member
 
Join Date: Mar 2006
Location: Virginia
Posts: 25
Wiring Harness Plugs

This is a general question for Wiring Harnesses. Has anyone ever tried to buy just the plug instead of buying the entire harness and splicing the new plug to the harness. This is for a Toro 62 inch commercial mower. The plug that supplies power and ground to the clutch got damaged some time back and I used regular crimps to connect the ground and hot back but have been informed that they are not as snug as the plastic plug and therefore caused the hot (male end) to break off inside the clutch. I'm not 100% convinced that is true. Any input would be greatly appreciated. My clutch is a Warner 5218-99. I am replacing the clutch but am trying to avoid having to replace the entire wiring harness as well.
Attached Images
 
__________________
snnoopy
Reply With Quote
  #2  
Old 07-31-2013, 12:02 AM
Breezmister's Avatar
Breezmister Breezmister is offline
LawnSite Bronze Member
 
Join Date: Jul 2007
Location: South Jersey
Posts: 1,188
Quote:
Originally Posted by snnoopy View Post
This is a general question for Wiring Harnesses. Has anyone ever tried to buy just the plug instead of buying the entire harness and splicing the new plug to the harness.
I have used these on a clutch on an Exmark, any hardware store should have these. For the whole connector, you can try Radio Shack.
I have gotten connectors there for Western plow controllers.
Attached Images
 
__________________
.
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity

The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic

RTFM What a concept

Reply With Quote
  #3  
Old 07-31-2013, 05:16 AM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,680
Pick your color and purchase from any Kohler dealer......

__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #4  
Old 07-31-2013, 08:31 AM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,617
If yer patient, and good, you might could use a Dremel or die grinder with a pointed burr and cut away the bakelite enough to expose a bit of terminal. Then solder a pigtail/lead on. Finish up with a blob of epoxy, and yer good to go. I've done it, as have other posters, works well.

Some new clutches come with a short pigtail lead assy, or you might could hunt around and find one.
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!
Reply With Quote
Reply

Tags
clutch , electrical , harness , plugs , wiring

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:51 AM.

Page generated in 0.06760 seconds with 10 queries