search sponsored by:
Advanced Search

The Green Industry's Resource Center

Thread Tools   Display Modes
Old 05-23-2012, 07:44 AM
Ajlawn1 Ajlawn1 is offline
LawnSite Member
Join Date: Apr 2010
Location: South Bend, IN
Posts: 32
More issues....

Well here is the pics after leveling the deck this weekend... The cut was a new direction so was not done in the normal pattern and pretty much the same thing!!! But gotta look on the bright side after a $3600 bagger just came in this is what I have now.... Either a crooked mower or junk bagger I am lost for words with this mower and company! Cannot get the ROPS up look at the distance between the two side....
Attached Images
Old 05-24-2012, 03:51 PM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,757
Have you brought this to your dealers attention? who is your dealer Riggs?
They can get this resolved for you I am sure, even if they have to work with us back in KS we will get this taken care of.

Old 05-25-2012, 08:28 AM
Ajlawn1 Ajlawn1 is offline
LawnSite Member
Join Date: Apr 2010
Location: South Bend, IN
Posts: 32
Yes took it to Riggs two days ago, have not heard anything so will be calling them today.... Mowed with a X-one with a 60" VX4 demo loaner they gave me and seems to cut better with a slight trace of the lines all the way in the dark stripe to the left, but much better then mine by far....
Attached Images
Old 06-08-2012, 12:11 PM
blackandgold's Avatar
blackandgold blackandgold is offline
LawnSite Senior Member
Join Date: May 2005
Location: cedar rapids iowa
Posts: 365
Have your deck pitched almost flat to 1/8 nose low and lower the adjustable front deck wall. It will take more horsepower but will stripe and cut much better. Also, make sure to keep the discharge chute down. It will also cut and stripe better with the chute down.
Old 06-14-2012, 11:49 PM
precisongreen32 precisongreen32 is offline
LawnSite Member
Join Date: Feb 2006
Location: toledo ,ohio
Posts: 45
raise deck and sharpen blades
Old 08-27-2013, 10:59 PM
bemper bemper is offline
LawnSite Member
Join Date: Aug 2013
Location: in the middle of the middle of the midwest (Kansas)
Posts: 14
stupid lines

Did any of you guys find a fix or solution to this problem? I have a super z 60 vx4 and it does this exact same thing. It leaves those lines pretty much were the blades meet. when I first got the mower it was bad. I went through the deck leveling procedure according to the manual and it has improved but I can still see those stupid lines.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:21 AM.

Page generated in 0.06929 seconds with 11 queries