Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #17  
Old 08-29-2013, 09:29 AM
WrightCommercial WrightCommercial is offline
Sponsor
 
Join Date: Apr 2008
Location: Frederick, MD
Posts: 491
kawakx125,

The blade needs to be low enough so when the grass is being layed over by the baffle the front cutting edge can cut it, if too high in the baffles the grass gets cut further back on the blade edge. If the blade is to low it will force some of the air it is moving out under the baffle dropping the chamber air flows and discharge velocity. On the older decks the blade height (cutting edge to the top of the air foil) was split in half by the bottom edge of the baffle. The new baffle has the sections that drop down (these help lower the air turbulence between the cutting chambers from forcing air under the baffle) lower then the overall bottom of the baffle and the blades are set in relation to those two drop downs, which exposes more of the air foil below the higher part of the baffles lower edge. It isn't usually a problem in this set up for most users but certain conditions may require this relationship to be changed.

Best Regards
Wright Mfg.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:04 AM.

Page generated in 0.17859 seconds with 9 queries