Register free!

The Green Industry's Resource Center


 
 
Thread Tools   Display Modes
  #1  
Old 09-01-2013, 11:21 AM
J&A Lawn Care J&A Lawn Care is offline
LawnSite Senior Member
 
Join Date: Apr 2007
Location: Chapel Hill NC
Posts: 436
Pump,Wheel motor or both?

I have a 2006 Hustler Z not the super with a 60" deck.The left side is not near as strong as the right side.It will eventually run the same speed as the right but takes longer to get there.The big difference is when you are riding on a hill sideways with the left wheel on the bottom side of the hill.It will run about 4 mph max until you hit flat ground.If the right side wheel is on the bottom side of the hill then it will run around 8-9mph. Is there anyway to figure out if I can replace one or the other or do both.My dealers answer is always bring it in and that is 1000000% not happening after spending $1700 on clutches within 200hrs with them and getting a sorry sir you must have just got a bad clutch WOW NO CRAP!
  #2  
Old 09-01-2013, 11:42 AM
hustlermidwest hustlermidwest is offline
LawnSite Senior Member
 
Join Date: Sep 2012
Location: Chicago, Ill
Posts: 635
I can theory you to death on what might be the issues. The only way I know for sure of what's wrong is putting the machine on a flow test. Knowing what the pumps are doing will tell me which way I need to go. At the cost of pumps and wheel motors I don't like guessing on what's wrong.

Brian O
  #3  
Old 09-01-2013, 11:46 AM
J&A Lawn Care J&A Lawn Care is offline
LawnSite Senior Member
 
Join Date: Apr 2007
Location: Chapel Hill NC
Posts: 436
well here is my model and serial # if a rep can get me the part #'s to the left side(sitting on the mower) pump and wheel motor and I will price them myself and do the job myself

Model # 927731
serial # 06061657
  #4  
Old 09-01-2013, 11:59 AM
hustlermidwest hustlermidwest is offline
LawnSite Senior Member
 
Join Date: Sep 2012
Location: Chicago, Ill
Posts: 635
You know the old saying "teach a man to fish" If you go to Hustlerturf.com and on the bottom of the page you'll see a link for manuals. Look up your model and serial number and you can get the parts and service manuals downloaded on you computer. Changing out the hydro system these manuals could prove to be very helpful.

Brian O
  #5  
Old 09-01-2013, 12:32 PM
J&A Lawn Care J&A Lawn Care is offline
LawnSite Senior Member
 
Join Date: Apr 2007
Location: Chapel Hill NC
Posts: 436
I could not find the parts manual for my model #??
  #6  
Old 09-01-2013, 01:43 PM
sbrickhouse89 sbrickhouse89 is offline
LawnSite Member
 
Join Date: Apr 2011
Location: Washington, NC
Posts: 18
This doesn't have anything to do with the hydro system, but goes back to the clutch issue you had. I am dealing with a mower now that started going through clutches left and right. It ended up being the upper bearing on the clutch locked up on one of the first ones and kept spinning on the crankshaft. The crankshaft is now worn alot smaller in that area which puts a side load on the bearings causing them to prematurely go out. I now have the engine pulled apart and replacing the crankshaft.
Just thought this would help some people diagnose why clutches are going out frequently.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 02:46 AM.

Page generated in 0.07446 seconds with 9 queries