Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-11-2013, 04:42 PM
camalusu camalusu is offline
LawnSite Member
 
Join Date: Sep 2013
Location: Pittsburgh, PA
Posts: 3
Newbie Need Help

I own a few commercial properties and bought what I think is a pretty good pump and motor. We used it yesterday and it worked pretty well. I spent quite a bit of time mixing a 200 gallon tank that had about 100 gallons of material left over from about two months ago from the guy I bought it of. When it got the last 30 gallons or so I noticed that the remaining material was clumpy. I was wondering if I should remove this before I get more material or will this mix into the new material if I spend some time on it. I am getting the same material as the previous owner. I know that is should be diluted 1/3 water to 2/3 material (at least this is what I was told). Any help greatly appreciated.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:37 PM.

Page generated in 0.06129 seconds with 8 queries