Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-10-2013, 07:33 PM
ed2hess's Avatar
ed2hess ed2hess is online now
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,575
Replacing Clutch Made Easy-Snapper WB

This is a sw20 snapper pro wb and it has those integrated hydro so the bottom is full After trying to slide the clutch up there I decided to just take the deck off. Six bolts and it drops off. Then rock it back.

Name:  046.jpg
Views: 153
Size:  47.5 KB

And the deck was very easy to get back attached. ups forgot to take a
picture of the clutch it is in another thread. I know you strong guys won't bother but......I would have needed a jack.
Reply With Quote
  #2  
Old 09-28-2013, 07:26 PM
ed2hess's Avatar
ed2hess ed2hess is online now
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,575
By the way is any body else having trouble with cluthes in this machine? It is a warner 5219-121 with two pulley positions. The new one just went out.....april to sept and no warranty.
Reply With Quote
  #3  
Old 09-28-2013, 09:11 PM
Jeff in AL's Avatar
Jeff in AL Jeff in AL is offline
LawnSite Senior Member
 
Join Date: Jul 2000
Location: Alabama
Posts: 443
Ed,
Thats one way to do it!
What is going out in the clutches? The bearings? Or just not engaging anymore?
I don't work on Snapper so can't tell you if there is any problems with them. But a clutch is a clutch.

Jeff
__________________
Jeff in AL

How very observant of you there captain obvious.

The amount of FREE information that you receive here will be directly proportional to the amount of information that you provide!
Reply With Quote
  #4  
Old 09-29-2013, 05:42 PM
ed2hess's Avatar
ed2hess ed2hess is online now
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,575
Quote:
Originally Posted by Jeff in AL View Post
Ed,
Thats one way to do it!
What is going out in the clutches? The bearings? Or just not engaging anymore?
I don't work on Snapper so can't tell you if there is any problems with them. But a clutch is a clutch.

Jeff
On first one the pulley tore loose, on this latest onethe friction plate with the springs tore loose. I examined the blades and sure don, t look like they hit something big. Kinda hard to put another one in. I will post pictures when I get it ti my place. Can't release the hydro on these units so bad time moving them.
Reply With Quote
  #5  
Old 09-29-2013, 05:50 PM
ed2hess's Avatar
ed2hess ed2hess is online now
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,575
This was the first one that failed....pulley tore off.
Attached Images
 
Reply With Quote
  #6  
Old 09-30-2013, 10:40 PM
Jeff in AL's Avatar
Jeff in AL Jeff in AL is offline
LawnSite Senior Member
 
Join Date: Jul 2000
Location: Alabama
Posts: 443
Ed,
Where does the pulley attach to the hub? Closest to the spring fingers? Is the pulley welded to the hub?
Just a thought, have you tried to talk to Warner Electric? It's worth a shot?
__________________
Jeff in AL

How very observant of you there captain obvious.

The amount of FREE information that you receive here will be directly proportional to the amount of information that you provide!
Reply With Quote
  #7  
Old 10-01-2013, 10:18 AM
Deererunner's Avatar
Deererunner Deererunner is online now
LawnSite Senior Member
 
Join Date: Jan 2011
Location: NJ
Posts: 291
Yeah I'm having trouble with mine. When I bought it used, it had a bad clutch so I put a new one on (tore it up due to over torqued it, my fault) bought another one, went to install it and won't engage. Don't know what's going on with it.
__________________
Reply With Quote
  #8  
Old 10-01-2013, 04:17 PM
ed2hess's Avatar
ed2hess ed2hess is online now
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,575
Quote:
Originally Posted by Jeff in AL View Post
Ed,
Where does the pulley attach to the hub? Closest to the spring fingers? Is the pulley welded to the hub?
Just a thought, have you tried to talk to Warner Electric? It's worth a shot?
Got any idea where to start on contacting them?

This is latest fail 4 months and no dings on the blades. Looks like rivets gave out.
Attached Images
 
Reply With Quote
  #9  
Old 10-01-2013, 05:10 PM
GrassGuerilla GrassGuerilla is online now
LawnSite Bronze Member
 
Join Date: Aug 2008
Location: St. Louis Missouri
Posts: 1,414
Is it possible someone is engaging the blades at WOT? That'll do it.
Posted via Mobile Device
Reply With Quote
  #10  
Old 10-01-2013, 06:06 PM
ed2hess's Avatar
ed2hess ed2hess is online now
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,575
Quote:
Originally Posted by GrassGuerilla View Post
Is it possible someone is engaging the blades at WOT? That'll do it.
Posted via Mobile Device
That just might be possible, but if a clutch fails under those conditions there would failures all over the place.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:11 PM.

Page generated in 0.09022 seconds with 10 queries