Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 10-01-2013, 11:56 PM
GSLC GSLC is offline
LawnSite Member
 
Join Date: Jan 2013
Posts: 9
Power Washer-No Pressure w/ new hose

Hello,
I have an excell power washer
(http://www.excellpressurewasher.com/vr2522.asp)

I recently broke the hose and had to buy a replacement. The power washer ran great up until the replacement. I bought the proper hose (1x4 x 25") made by briggs and stratton. When I tried it out, the power washer would squirt water through the line but I have no pressure.

Any idea's on what might be causing this?
Reply With Quote
  #2  
Old 10-02-2013, 08:07 AM
tigerepairdotcom tigerepairdotcom is online now
LawnSite Member
 
Join Date: Sep 2013
Location: duluth, ga
Posts: 239
See this Thread http://www.managemylife.com/mmh/ques...odel-580752201

When a pressure washer loses pressure, it is usually because the orifice in the outlet end of the tip is restricted. When the orifice is restricted the pressure inside the pump gets very high. The internal relief valve inside the pump opens and the pump circulates water inside to releave the pressure.

Try different tips to verify this. Run a small wire through the orifice to clean it and remove the tip and run water through the pump for several minutes to clean out the pump and hose.

http://www.youtube.com/watch?v=WfUcXlBZRxk See this video for a repair
__________________
It is very important for you to post your results once the problem is solved so that people will be able to reference a solution to their problem down the road. YEARS may go by and someone has the same problem PLEASE POST YOUR "IT WAS FIXED WITH x SOLUTION.
Reply With Quote
  #3  
Old 10-21-2013, 10:24 PM
GSLC GSLC is offline
LawnSite Member
 
Join Date: Jan 2013
Posts: 9
The previous hose has 2600 PSI Max, 179 Bar. The replacement is 3,000psi and 207 Bar. I do not know what the BAR means, could this discrepancy be the cause of my issue?
Reply With Quote
  #4  
Old 10-21-2013, 10:36 PM
ricky86 ricky86 is offline
LawnSite Bronze Member
 
Join Date: Aug 2008
Location: Monmouth Cty N.J.
Posts: 1,235
Bar is a pressure measurment. European. 1 Bar is 14.7 psi. Is the hose the same diameter?
Reply With Quote
  #5  
Old 10-21-2013, 10:41 PM
GSLC GSLC is offline
LawnSite Member
 
Join Date: Jan 2013
Posts: 9
Yes, the replacement is the same diameter.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:37 PM.

Page generated in 0.06531 seconds with 9 queries