Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #37  
Old 10-08-2013, 12:33 PM
greendoctor greendoctor is offline
LawnSite Fanatic
 
Join Date: Mar 2008
Location: Honolulu, Hawaii
Posts: 7,411
I want both a front and rear adjustment so that the angle of the bedknife is not changed over the range of height adjustment. With a fixed rear, the McLane has an overly aggressive angle when set to cut low and not enough when it is set to cut higher. I want it to cut well at all height ranges, including 2". Not everything I deal with is mowed down to fairway height. There are two grasses that must not be cut lower than 2". Setting the height of cut with the front and rear rollers will be done with the height adjustment bar with the screws and locknuts in them.
__________________
They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
Benjamin Franklin 1775

Sell not virtue to purchase wealth, nor Liberty to purchase power.
Benjamin Franklin Poor Richard's Almanac1738
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 11:28 PM.

Page generated in 0.21915 seconds with 9 queries