search sponsored by:
Advanced Search

The Green Industry's Resource Center

Prev Previous Post   Next Post Next
Old 11-21-2013, 08:06 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,996
Originally Posted by acofwv View Post
If your talking about those two pins on top of the hydro, one of them is popped up & the other one is still down

OK....... That wasn't what I was talking about but at that time I didn't have numbers to see exactly which hydro pump you have on that unit.

But, I feel this popped valve is your issue...... I suggest cleaning the top of the hydro off real well so nothing drops down into these ports, Then remove both check valves and see if you can then push the popped pin back into place with your finger then perform this test;

If the pin stays down and both pass the spring & leakage test, Re-install and purge as you did before by removing the plug on top......
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:20 AM.

Page generated in 0.10678 seconds with 9 queries