Register free!

The Green Industry's Resource Center

Thread Tools   Display Modes
Prev Previous Post   Next Post Next
Old 01-20-2014, 09:02 PM
Jeff in AL's Avatar
Jeff in AL Jeff in AL is offline
LawnSite Senior Member
Join Date: Jul 2000
Location: Alabama
Posts: 590
Tightening the screw on what "back cover"? The cam cover or the rewind assy.?

You should have a plug or two around for any and all your equipment, just in case...

Using the EDTA usually doesn't harm the plug unless you don't drain it all out of the cylinder and it gets the plug wet.

It is possible that after using the EDTA that you may "carbon foul" a plug... Which means there is a small piece of carbon on the plug electrode and is grounding the plug out... Either remove the carbon that is fouling the plug or replace the plug.
Jeff in AL

How very observant of you there captain obvious.

Be very wary of advice given from people who repair outdoor power equipment in their kitchen!

The amount of FREE information that you receive here will be directly proportional to the amount of information that you provide!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012,™ - Moose River Media
All times are GMT -4. The time now is 08:12 AM.

Page generated in 0.13935 seconds with 10 queries