search sponsored by:
Advanced Search

The Green Industry's Resource Center

Prev Previous Post   Next Post Next
Old 02-01-2014, 03:17 PM
TPendagast's Avatar
TPendagast TPendagast is offline
LawnSite Fanatic
Join Date: May 2008
Location: anchorage, ak
Posts: 6,726
Originally Posted by JTLarson View Post
I know this is off the main subject of Exmark TT's, but Ferris/Snapper walk behinds have simple crank handles to raise and lower the deck for different heights. Unfortunately they don't have the settings marked with a number so you have to measure the height on a setting and adjust from there if u want specific 3" cuts for example. They don't have the good iCD deck and they are a pistol grip machine vs ECS controls. They do mow and handle well. I am unsure if they have a bagger available for them. Bagging with a bigger walk behind does suck, but although inefficient, you could side discharge first, then do a second pass with the bagger like many do with leaf cleanups in the fall.
Posted via Mobile Device
the indicator on a ferris/snapper deck is a pointer attached to the deck, there is a decal with inches and increments on the frame (which doesn't move) This is how you tell what height you are at.

Either your decal is missing on both sides of the mower, or you should read the instruction manual and it would have told you where to look for height of cut.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012,™ - Moose River Media
All times are GMT -4. The time now is 09:21 PM.

Page generated in 0.22459 seconds with 10 queries