Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #31  
Old 04-01-2014, 06:44 AM
Falcon50EX's Avatar
Falcon50EX Falcon50EX is online now
LawnSite Senior Member
 
Join Date: May 2009
Location: GA
Posts: 738
I narrowed the tire support by one inch and cut the front channel off also cut out a space for the axle. I still have to put it back in the trailer mount.
Attached Images
       
__________________

Training them early
Reply With Quote
  #32  
Old 04-01-2014, 07:29 PM
Cadzilla Cadzilla is offline
LawnSite Senior Member
 
Join Date: Feb 2012
Posts: 666
Exactly what you have to do. It can be done with the two bolt system but I dig the permanent welds.

Right on Falcon.
Reply With Quote
  #33  
Old 04-01-2014, 08:57 PM
grassmasterswilson grassmasterswilson is online now
LawnSite Gold Member
 
Join Date: Mar 2007
Location: nc
Posts: 3,279
Nice work Richard!

I may try a set of fast straps and secure my z over the double axle so I could have room for dry Fert when applying it or maybe put my water tank in front instead of in the bed of the truck on full liquid rounds.
__________________
GrassMasters, LLC
Wilson, NC
www.grassmasterswilson.com
Reply With Quote
  #34  
Old 04-01-2014, 09:23 PM
buttaluv buttaluv is online now
LawnSite Senior Member
 
Join Date: Dec 2000
Location: MidWest
Posts: 503
Master Gardener,
I'd like to see a pic of your setup, was that a van, with a rack...
Reply With Quote
  #35  
Old 04-01-2014, 09:51 PM
Falcon50EX's Avatar
Falcon50EX Falcon50EX is online now
LawnSite Senior Member
 
Join Date: May 2009
Location: GA
Posts: 738
Quote:
Originally Posted by Cadzilla View Post
Exactly what you have to do. It can be done with the two bolt system but I dig the permanent welds.

Right on Falcon.
Thanks
I tried the one bolt but the arm kept moving. I just did not have a good feeling about it. I will post pictures of the Z locked into it.
__________________

Training them early
Reply With Quote
  #36  
Old 04-01-2014, 09:54 PM
Falcon50EX's Avatar
Falcon50EX Falcon50EX is online now
LawnSite Senior Member
 
Join Date: May 2009
Location: GA
Posts: 738
Quote:
Originally Posted by grassmasterswilson View Post
Nice work Richard!

I may try a set of fast straps and secure my z over the double axle so I could have room for dry Fert when applying it or maybe put my water tank in front instead of in the bed of the truck on full liquid rounds.
Thanks
Do you have room on the Max for fast straps??
__________________

Training them early
Reply With Quote
  #37  
Old 04-02-2014, 10:12 PM
Falcon50EX's Avatar
Falcon50EX Falcon50EX is online now
LawnSite Senior Member
 
Join Date: May 2009
Location: GA
Posts: 738
Well finally had time to put it all back on the trailer.
Attached Images
   
__________________

Training them early
Reply With Quote
  #38  
Old 04-03-2014, 10:06 PM
humble1's Avatar
humble1 humble1 is offline
LawnSite Silver Member
 
Join Date: Nov 2007
Location: MA
Posts: 2,308
Quote:
Originally Posted by robertsturf View Post
Just got my 2012 Gmc 1 ton back from my welder after building a removable dovetail. The ramp is operated by a remote control winch. This truck is a multi use truck mowing, treatments, mulch, leaves and snow. It also has a dump hoist for mulch and leaves. My issue is how do I secure mowers, Z spray without anything being permanent? Have looked at Pro locker etc... not wide enough. Thanks for input
I like fast straps, they go over the tire, when your done you remove the woven strap, but the base bould stay connected to the bed, you can drive over it, etc
__________________
1-Z-plugger
1-lawnsolutions aerator wb
1-Bluebird 48 tow behind
1-Z-Spray Int
1-T-3000
1-Permagreen Mag
4-backpackmistblowers
1-Four Wheeler with 50ft air blast mist sprayer
1-F-250 4x4 supercab p/u
1-E-250 van w-enclosed trailer
1-E-150 van
2-landscape trailers
a ton of backpack sprayers
Reply With Quote
  #39  
Old 04-03-2014, 10:39 PM
humble1's Avatar
humble1 humble1 is offline
LawnSite Silver Member
 
Join Date: Nov 2007
Location: MA
Posts: 2,308
Quote:
Originally Posted by humble1 View Post
I like fast straps, they go over the tire, when your done you remove the woven strap, but the base bould stay connected to the bed, you can drive over it, etc
I think for the dump truck fast straps would work pretty good
http://www.trailerracks.com/fastrap.html
__________________
1-Z-plugger
1-lawnsolutions aerator wb
1-Bluebird 48 tow behind
1-Z-Spray Int
1-T-3000
1-Permagreen Mag
4-backpackmistblowers
1-Four Wheeler with 50ft air blast mist sprayer
1-F-250 4x4 supercab p/u
1-E-250 van w-enclosed trailer
1-E-150 van
2-landscape trailers
a ton of backpack sprayers
Reply With Quote
  #40  
Old 04-04-2014, 07:04 PM
OrkRule OrkRule is offline
LawnSite Member
 
Join Date: Apr 2014
Location: Lebanon, IN
Posts: 4
As far as the sprayer connection goes there are 2 1x1 square tubes in the front of the frame that are good connection points. Also in Falcon's last pic with the Stihl in the background, on the far right side about 1/5 the way from the top of the pic is a little hole in the frame, that's plenty enough support.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:13 PM.

Page generated in 0.11519 seconds with 10 queries