Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-19-2014, 02:04 PM
xxl xxl is offline
LawnSite Member
 
Join Date: Nov 2007
Location: MO
Posts: 141
Carb help

Dose any one have a picture of the carb linkage on this mower. See i picked it up cheap but the the shutter valve was off and now i want to put it back in. cant seem to get it in right


Mower
Toro 20463
serial 5000000

engine Briggs
128802- 0615-01
Reply With Quote
  #2  
Old 04-19-2014, 03:15 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,690
There's five different throttle control assemblies for that engine, Can you post a couple pics of your set-up ?
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #3  
Old 04-19-2014, 04:58 PM
xxl xxl is offline
LawnSite Member
 
Join Date: Nov 2007
Location: MO
Posts: 141
hows this? I am not sure if i put the valve in right it was hanging out so i could have the throttle shaft in wrong I am at a loss here
Attached Images
   
Reply With Quote
  #4  
Old 04-19-2014, 05:58 PM
dutch1's Avatar
dutch1 dutch1 is online now
LawnSite Silver Member
 
Join Date: Dec 2004
Location: Jayhawk
Posts: 2,178
While Rob is smacking down his biscuits and gravy, I'll slip in a bit and let him slap me around if I'm wrong. By shutter valve, are you referring to the throttle shaft/butterfly? From what it looks like to me, you have the throttle shaft 180 degrees out of sync. The hole that the linkage goes in should goes to the other side--toward the engine rather than to the air horn side. Unless my dementia has kicked in, the governor spring should go in the same hole as the linkage.
Reply With Quote
  #5  
Old 04-19-2014, 08:54 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,690
Quote:
Originally Posted by dutch1 View Post
While Rob is smacking down his biscuits and gravy.
Homemade chicken noodle soup tonight Dutch !


Yer right on the throttle shaft but the spring does go in the loop on the link rod......
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #6  
Old 04-19-2014, 10:23 PM
dutch1's Avatar
dutch1 dutch1 is online now
LawnSite Silver Member
 
Join Date: Dec 2004
Location: Jayhawk
Posts: 2,178
Thanks for picking up the slack, Rob. Correct you are on the governor spring--the senility must be settling in. I swear I did a similar Briggs this week with a shorter governor spring that hooked into the throttle shaft cap--can't recall the engine numbers but it may have been an OHV.

Chicken soup, huh? You must be a tired boy if it took you 4 hours to catch that chicken!!!!!
Reply With Quote
  #7  
Old 04-19-2014, 10:55 PM
xxl xxl is offline
LawnSite Member
 
Join Date: Nov 2007
Location: MO
Posts: 141
is this better? cant start it tonight to late
Attached Images
   
Reply With Quote
  #8  
Old 04-20-2014, 07:38 AM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,690
That looks better, Gander at this; http://outdoorpowerinfo.com/repairs/briggs_125k02.asp
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #9  
Old 04-20-2014, 11:54 AM
xxl xxl is offline
LawnSite Member
 
Join Date: Nov 2007
Location: MO
Posts: 141
okay something has to be off i dont have throttle control and its still hard to start its like theres no choke on it
Reply With Quote
  #10  
Old 04-20-2014, 12:51 PM
dutch1's Avatar
dutch1 dutch1 is online now
LawnSite Silver Member
 
Join Date: Dec 2004
Location: Jayhawk
Posts: 2,178
That carb came in two configurations--a primer system and a choke system. Judging from your last picture--I don't see a choke butterfly. The filter base, which attaches to the carb with a gasket, should have a primer bulb. If the gasket is good, two or three pumps of the primer bulb pressurizes the carb bowl, pushing fuel up through the fuel nozzle into the venturi of the carb which provides fuel to start.

http://www.wiseequipment.net/pages/O...61502/05460004
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:02 PM.

Page generated in 0.10515 seconds with 10 queries