Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #21  
Old 10-16-2013, 03:03 PM
inzane's Avatar
inzane inzane is online now
LawnSite Bronze Member
 
Join Date: Jan 2012
Location: Dallas, GA
Posts: 1,527
i have always used the lesco chemlawn guns, wouldn't use anything else really. pretty solidly built, and great coverage.


Quote:
Originally Posted by smallstripesnc View Post
The skid sprayer I'm about to buy comes with a teejet gun. I have a friend that has the lesco/chemlawn gun and he loves it. Says the coverage is great.
Reply With Quote
  #22  
Old 10-16-2013, 03:07 PM
inzane's Avatar
inzane inzane is online now
LawnSite Bronze Member
 
Join Date: Jan 2012
Location: Dallas, GA
Posts: 1,527
this is after i got the lettering done a few weeks ago.
Attached Images
 
Reply With Quote
  #23  
Old 10-16-2013, 03:11 PM
Dylan's Lawn Care Dylan's Lawn Care is offline
LawnSite Member
 
Join Date: Dec 2010
Posts: 116
Quote:
Originally Posted by inzane View Post
i have always used the lesco chemlawn guns, wouldn't use anything else really. pretty solidly built, and great coverage.
What pump are you using?
Reply With Quote
  #24  
Old 10-16-2013, 03:45 PM
KrayzKajun's Avatar
KrayzKajun KrayzKajun is online now
LawnSite Fanatic
 
Join Date: Oct 2006
Location: Harvey,LA
Posts: 10,182
Truck looks really good. I did like the frog in the logo too.
Posted via Mobile Device
Reply With Quote
  #25  
Old 10-16-2013, 03:48 PM
inzane's Avatar
inzane inzane is online now
LawnSite Bronze Member
 
Join Date: Jan 2012
Location: Dallas, GA
Posts: 1,527
this......
Attached Images
 
Reply With Quote
  #26  
Old 04-21-2014, 10:48 AM
Dylan's Lawn Care Dylan's Lawn Care is offline
LawnSite Member
 
Join Date: Dec 2010
Posts: 116
What psi does your pump run at when your spraying?
Reply With Quote
  #27  
Old 04-21-2014, 09:34 PM
CHARLES CUE's Avatar
CHARLES CUE CHARLES CUE is online now
LawnSite Bronze Member
 
Join Date: Jun 2006
Location: BURTON WV
Posts: 1,768
Quote:
Originally Posted by Dylan's Lawn Care View Post
What psi does your pump run at when your spraying?
I can't speak for Inzane but I have one with a fatboy pump. No mater the pressure you have once you pull the trigger on the spray gun 40 psi at the gauge, at the end of the hose I would say 15 lbs or less.
Reply With Quote
  #28  
Old 04-21-2014, 11:20 PM
DA Quality Lawn & YS's Avatar
DA Quality Lawn & YS DA Quality Lawn & YS is offline
LawnSite Fanatic
 
Join Date: Sep 2007
Location: Rochester, MN
Posts: 7,781
Quote:
Originally Posted by RigglePLC View Post
Sweet. Way to go, Inzane! It looks to me like you have room for a spreader and 30 bags of fert. That will come in handy. The Earthway stainless spreader 2150, takes up less room. I suspect you could slide a 200 gal tank on the back--for those days when you have an extra big lawn.

I suggest a rain hood or flat metal plate over the motor to protect it from the solution that drips off the hose when you wind it in when the grass is wet.

Can you get good gallons per minute flow? Good agitation, (when needed?)
100 gal of mix and 30 bags of fert? That'll squat that 1/2 ton down to the axle.
__________________
7x14 Stealth SE Enclosed with 48" side ramp
08 Toro Z400 48" deck, 21HP Kaw with EZ Vac twin bag
09 Exmark Turf Tracer HP 36"
21" Toro SR4 Super Recycler
Stihl KM90 Kombi w/ straight shaft trimmer & tiller heads
Husqvarna 125B Blower
PG Magnum
Turfco XT5 Aerator
Turfco LS-22 Overseeder

I can do all things through Him who gives me strength.
Philippians 4:13
Reply With Quote
  #29  
Old 04-22-2014, 07:41 AM
inzane's Avatar
inzane inzane is online now
LawnSite Bronze Member
 
Join Date: Jan 2012
Location: Dallas, GA
Posts: 1,527
lol.. i'd never do that. when i'm doing granular, the tank is just about empty or just enough water to fill up the backup sprayers every now and again. if i need that much fert it will be going on a trailer. if i had a need for that much materials each day i'll have a 2500hd by then.

Quote:
Originally Posted by DA Quality Lawn & YS View Post
100 gal of mix and 30 bags of fert? That'll squat that 1/2 ton down to the axle.
__________________

Servicing Dallas, Acworth, Kennesaw, & Woodstock, Ga

Last edited by inzane; 04-22-2014 at 07:47 AM.
Reply With Quote
  #30  
Old 04-22-2014, 07:47 AM
inzane's Avatar
inzane inzane is online now
LawnSite Bronze Member
 
Join Date: Jan 2012
Location: Dallas, GA
Posts: 1,527
i have no pressure gauge, so not even sure. I spray at 1.5 gpm . I like this pump.. i did tear the diaphragm one day when i got out there and it was a little to cold. I like that they are easy to fix. i bought one of the 7gpm delevan fat boys with a pressure switch as a backup too.

Quote:
Originally Posted by CHARLES CUE View Post
I can't speak for Inzane but I have one with a fatboy pump. No mater the pressure you have once you pull the trigger on the spray gun 40 psi at the gauge, at the end of the hose I would say 15 lbs or less.
__________________

Servicing Dallas, Acworth, Kennesaw, & Woodstock, Ga
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:11 PM.

Page generated in 0.07464 seconds with 10 queries