Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 06-14-2014, 10:05 AM
s9496 s9496 is offline
LawnSite Member
 
Join Date: Jun 2014
Location: River Falls, WI
Posts: 5
Toro pdf service manual

Picked up a backup and needs a tune up.
I have gone to the toro website looking for a service manual for a Z-master 150 but the link is dead. Any place a person can download one.
Reply With Quote
  #2  
Old 06-14-2014, 10:21 AM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,656
You should start by reading this: http://www.lawnsite.com/showthread.php?t=144040
Toro didn't make the engine, go to the motor mfg site.
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!
Reply With Quote
  #3  
Old 06-15-2014, 10:04 AM
s9496 s9496 is offline
LawnSite Member
 
Join Date: Jun 2014
Location: River Falls, WI
Posts: 5
Mower deck and Hydro

I have info on the Kohler engine, but want to do work the deck and hydro pumps
Reply With Quote
  #4  
Old 06-15-2014, 10:13 AM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,761
As Fish posted, http://www.lawnsite.com/showthread.php?t=144040

There's nothing we can do without the model AND serial number off your machine.....
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #5  
Old 06-15-2014, 10:08 PM
s9496 s9496 is offline
LawnSite Member
 
Join Date: Jun 2014
Location: River Falls, WI
Posts: 5
It is Toro Z Master 150 Model 74178 spec # PS-65593 Serial # 3312520541. Thanks if anyone can help.
Reply With Quote
  #6  
Old 06-15-2014, 10:28 PM
s9496 s9496 is offline
LawnSite Member
 
Join Date: Jun 2014
Location: River Falls, WI
Posts: 5
Service Manuals

I have done some test cuts and noticed a strip between the center and left blade that cuts ragged, The deck is clean and I decided to remove the deck and check the spindles. I first thought the bearings on the right spindle were gone but closer checking found the nut was loose bearings and races look good. The manual is needed to check all specs to determine the cause of the poor cut.
Reply With Quote
  #7  
Old 06-17-2014, 12:03 AM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,761
Quote:
Originally Posted by s9496 View Post
Serial # 3312520541

Can we assume the first 3 in the serial is a typo and should be a 2 since there's no serial starting with 3 ?

If so check here; http://www.toro.com/en-us/parts/Page...faultTab=parts Click on manuals then choose the one you want.....
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #8  
Old 06-17-2014, 11:50 PM
s9496 s9496 is offline
LawnSite Member
 
Join Date: Jun 2014
Location: River Falls, WI
Posts: 5
Torque of spindles

Thanks for the link. Do you know the recommended pounds of torque for the spindle jam nut? I thought there might be a service manual with this info but I'm not finding that.
Reply With Quote
  #9  
Old 06-18-2014, 01:52 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,761
If there's a torque it will be in the manual, May even be in the owner's manual......
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #10  
Old 06-18-2014, 02:06 PM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,656
Quote:
Originally Posted by s9496 View Post
Thanks for the link. Do you know the recommended pounds of torque for the spindle jam nut? I thought there might be a service manual with this info but I'm not finding that.
There's a complete section on spindle repair in the service manual.
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:26 PM.

Page generated in 0.08855 seconds with 9 queries