Register free!

The Green Industry's Resource Center



 
 
Thread Tools   Display Modes
  #11  
Old 12-18-2002, 08:22 AM
ScottH ScottH is offline
LawnSite Member
 
Join Date: Jan 2001
Location: Lower Burrell, PA
Posts: 60
Steel supply suggestions

Skip the home depot spots. Try local welding/fabricating shops. If you need a size and type they generally use you should get decent prices. sometimes for decent customers and they only need a small piece, if we have a drop thats big enough they dont even get charged.

Happy hunting.
  #12  
Old 12-18-2002, 11:14 AM
stslawncare stslawncare is offline
LawnSite Bronze Member
 
Join Date: Jun 2000
Location: DE
Posts: 1,474
this is a little off topic but for you guys in delaware and close by in PA and other neighboring states, does anyone know of any good steel supply companys? bob i didnt know home depot carried steel???? i am looking to get some expanded metal and other smaller misc. pieces.
__________________
Scottie
STS Lawn Care
Nutra Soils Inc. ( www.nutrasoils.com )
  #13  
Old 12-18-2002, 11:39 AM
Bob Minney's Avatar
Bob Minney Bob Minney is offline
LawnSite Bronze Member
 
Join Date: Jan 2002
Location: The Hottest driest city next to Hades - Denver Colorado
Posts: 1,094
stslawncare
home depot has metal products in their hardware isle around the nuts & bolts.
Very expensive to buy there but handy for emergency repairs.
__________________
If you want people to notice your faults, start giving advice.
  #14  
Old 12-18-2002, 12:56 PM
dougaustreim dougaustreim is offline
LawnSite Senior Member
 
Join Date: Jan 2002
Location: Brookings SD
Posts: 488
Many times the scrap or salvage yards sell surplus metal as well. If not salvage yards will likely know where there is a good source

Doug Austreim
  #15  
Old 12-26-2002, 10:51 PM
DavidD's Avatar
DavidD DavidD is offline
LawnSite Member
 
Join Date: May 2002
Location: sc
Posts: 108
Bunton Guy, Im in greenville,SC give this guy a call

Jerry At specialty Steel
864-299-8771

If he's too far from you he will know someone in your area that can help you.
I buy steel from him.

1 1/ 2 x 1 1/2 x 3/16 x 20' 13.25 Ea
2"X2" x 24' Tube 3/16 Wall 40.00
4x10' Sheet metal 16 Gage 42.05
1X1X1/8x20' Angle 6.26 Ea

Forget the welding shops there Addind 25% to the sale price
  #16  
Old 01-01-2003, 11:29 PM
CMLLawnServices's Avatar
CMLLawnServices CMLLawnServices is offline
Suspended
 
Join Date: Oct 2002
Location: Huron County,Ontario,Canada
Posts: 333
u have got to get out of the city to find cheap steel and don`t be afraid to use salvaged stuff. I`ve been pretty lucky my dad used to own a welding shop and knows all the guys around. now he is a milright at a local saltmine and they just through extra steel out in the dumpster so he get most of what ever he needs from the dumpster . he finished a project this spring installing an elevator that come from sweden and they through out 20 peices of 6 foot by 6inch galvanized so when I built my 6x10 landscape trailer this spring I used that as sides. and a freind of my dads works at a kubota dealership , he got me a bunch of frames that they use to ship tractors from japan. I cut 2 of those up and used them as my trailer frame.
  #17  
Old 01-02-2003, 10:58 AM
SDlawndawg SDlawndawg is offline
LawnSite Member
 
Join Date: May 2002
Location: Michigan
Posts: 119
old bed frames are a good source for angle. I found a stack of real estate signs that I still use to this day. Good amount of small angle and I put the sheetmetal underneath my chopsaw to prevent a fire.
  #18  
Old 01-20-2003, 11:49 AM
walker-talker's Avatar
walker-talker walker-talker is offline
LawnSite Platinum Member
 
Join Date: Aug 2001
Location: Midwest
Posts: 4,774
Yeah, I picked up some used bed frames for some light stuff. I get my metal from a surplus store. If I really want to go cheap I can get the rusted stuff and clean up myslef. The good stuff goes for about $1 ft for 2 X 2 angle, but about half that for the rusted stuff. All ya have to do is take a wire wheel to it. Just depends on how valuable your time is.

MATT
__________________
PROGRESSIVE LAWN & LANDSCAPE
Check out my website

www.progressivelawn.com
www.wichitalawnmowing.com
www.partybuswichitaks.com

"We are what we repeatedly do. Excellence, then, is not an act, but a habit."
- Aristotle

"Simplicity is the ultimate sophistication."
- Leonardo da Vinci
  #19  
Old 11-10-2003, 07:39 PM
Carolina Cutter's Avatar
Carolina Cutter Carolina Cutter is offline
LawnSite Bronze Member
 
Join Date: Aug 2003
Location: Fayetteville, NC
Posts: 1,006
2x2 square 14 gauge here in Fayetteville is about $32 for 20' and 3/4 expanded is $30 I think, the 1 1/2 expanded is even cheaper.
__________________
Carolina Cutter Lawncare
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:26 AM.

Page generated in 0.08561 seconds with 9 queries