|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#1
12-22-2002, 02:53 PM
|
||||
|
||||
|
t box
Has anyone ever repaired or replaced their t box on a dixie chopper?I have a couple of '96 models and one seems a little noisy.I saw some in j-thomas for 174 dollars.
__________________
 "Service your customers or someone else will" XW2200,XW2401,XT3300 72 in,Classic 3360;John Deere Gs30 Walkbehind,'85 Chevy 1 ton,'Chevy 03 3/4 ton,10 ft and 16 ft trailers,Redmax,Honda, and Shindaiwa handhelds 
|
|
#3
12-22-2002, 09:23 PM
|
||||
|
||||
|
Yes ,I read his and was hoping that too.
__________________
"Service your customers or someone else will" XW2200,XW2401,XT3300 72 in,Classic 3360;John Deere Gs30 Walkbehind,'85 Chevy 1 ton,'Chevy 03 3/4 ton,10 ft and 16 ft trailers,Redmax,Honda, and Shindaiwa handhelds
|
|
#4
12-22-2002, 10:16 PM
|
||||
|
||||
|
I have replaced a couple of T boxes. Getting noisey is not a good sign. I'll check the files tomorrow to refresh my memory as far as the price goes.
__________________
Bill Parrish Fine Lines Lawn www.finelineslawn.com There are no stupid questions... they're just the easiest to answer. 
|
|
#6
02-18-2004, 11:08 AM
|
||||
|
||||
|
I have rebuilt mine. I had the lower seal go out. Wasn't very hard to rebuild. I put new bearings on the shafts and new seals. The biggest problem I had was getting the pulley off the bottom end. Ended up using a tie-rod puller, worked great.
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
