Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 11-15-2000, 08:23 PM
AK Snow AK Snow is offline
LawnSite Member
 
Join Date: Sep 2000
Location: Fairbanks, Alaska
Posts: 19
I'm getting ready to start building an equipment trailer. I figure that the combined weight of the trailer itself and the skid steer I'll be hauling will be somewhere between 8,000 and 9,000 pounds. I'd appriciate any advice anyone might have to share on the pros and cons of using a pintle hook and lunnette eye as opposed to a standard coupler and ball. Also, any thoughts on hitches that combine a ball and a pintle hook?

thanks

Alaska Dave
Reply With Quote
  #2  
Old 11-15-2000, 09:34 PM
GeoffDiamond GeoffDiamond is offline
LawnSite Bronze Member
 
Join Date: Dec 1999
Location: Maine
Posts: 1,652
Well you could use a 2 5/16" ball. However the pintle hook is a much better coupler. However I use a standard, every trailer that doesn't have air breaks, has a Pintle hook, and a 7 wire plug, that way all the trucks have the same hitch and wiring, so every truck can pull every trailer. This means my 5X10 light duty trailer can be pulled by my ranger or F 650. Yes the pintle hook looks weird on a 5X10, and looks even dumber on a ranger. BTW the 5X10 trailer has no breaks but uses the 7 wire plug as a standard, Just like the ranger doesn'r have breaks wired in because it only hauls light trailers, but it has a 7 wire plug. So if all your trailers use a 2 5/16 ball I would go that way, However the Pintle hook, if ya don't mind have an extra hitch on the truck is much better.

Geoff
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:17 PM.

Page generated in 0.05993 seconds with 9 queries