Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-03-2004, 09:38 PM
fixer67's Avatar
fixer67 fixer67 is offline
LawnSite Silver Member
 
Join Date: Apr 2004
Location: Tryon NC
Posts: 2,161
Walker Seat bolt removal tool

I have made a tool for removing the seat bolts on Walkers. I am going to try to post the photos. Wish me luck. I took a 9/16 socket and cut out for the weld on the bolts but that weaken the socket so much it would have failed the first time I would have used it. I found a piece of water pipe that the socket could be pressed into and then pressed that in to a second piece of pipe. and welded it all up.I had to go back and do a little detail grounding with a Dremel tool to get it just right. I can put it on my battery impact and remove a seat before you can thank about it. If you look real good you can see a make down the side of the socket. This make shows me where the cut out for the weld is at to make it easier to line up.

<img src="http://img64.photobucket.com/albums/v196/fixer47/Walker/Walker_seat_tool-2.jpg">

<img src="http://img64.photobucket.com/albums/v196/fixer47/Walker/Walker_seat_tool-1.jpg">
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:10 AM.

Page generated in 0.11696 seconds with 8 queries