Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 01-08-2001, 01:05 AM
KK KK is offline
LawnSite Member
 
Join Date: Dec 2000
Posts: 90
I have a goodwrench crate motor. Should I use the existing harmonic balancer or buy new? Also, when pre oiling which direction should the distributor shaft turn in the oil pump looking from the top? (CW or CCW?.
Reply With Quote
  #2  
Old 01-08-2001, 07:13 AM
plowking35 plowking35 is offline
LawnSite Bronze Member
 
Join Date: Dec 1999
Location: S.E. CT
Posts: 1,687
clockwise on the oil pre prime.
If the damper looks worn at all get a new one, but if it looks in good shape, go ahead and use it.
Dino
__________________
I am not the biggest and I am not the best but I fall somewhere comfortably in between.
Reply With Quote
  #3  
Old 01-09-2001, 11:03 PM
KK KK is offline
LawnSite Member
 
Join Date: Dec 2000
Posts: 90
I heard that the rubber in the balancer deteriorates over time and can throw the timing mark off. So I bought a new one. As for preoiling, I should turn the crank some after the oil is flowing right?
Reply With Quote
  #4  
Old 01-09-2001, 11:29 PM
John DiMartino John DiMartino is offline
LawnSite Silver Member
 
Join Date: Jan 2000
Location: Walden,NY
Posts: 2,555
Even if you turned the dist, the wrong way,it wouldnt hurt snything,it just would gurgle a little,you'l know when it starts pumping,thats about the time your drill will bog right down,prelube until oil is coming out all the tips of the pushrods/rockers and running down into the ball socket area of the rockers.the balancer,i would replace if the rubber is cracked at all,an old balancer will shorten the life of a new engine if its worn,they are not to expensive.
__________________
My Equipment Pictures
Reply With Quote
  #5  
Old 01-12-2001, 12:33 AM
KK KK is offline
LawnSite Member
 
Join Date: Dec 2000
Posts: 90
This is a new engine so I decided to put a new damper on it. I plan to keep the old engine pretty much complete when I pull it and possibly rebuild it someday since it is relatively good and has 4-bolt mains. Thanks for your help guys.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:08 PM.

Page generated in 0.07155 seconds with 9 queries