Originally Posted by Breezmister
I know how you feel, I had a FX 801 that was leaking there last year. It really is a simple fix. All you need to do is remove the hardware from the governor shaft, it slid right off after loosening the nut. I have transmission seal removers for working on 2 cycle seals so I used one of them, popped the seal right out.
Slid the new seal on the shaft to start it in the right alinement, then took a small 1/4 socket the same size as the seal and gently tapped it it. Put the hardware back on and tightened the nut, done.
Thank You Slapper
That's great news!
I have done searched high and low the Internet for this...
Nowhere did it spell out that solution.
I owe you one.