Originally Posted by weeze
the problem with the blitz can is the spout is angled. this works good for trimmers or other angled gas openings but it doesn't work well on gas openings that are straight up like on ztr or push mowers.
i did put the vents on them and also tried the ez pour spouts. the spouts are terrible because if you try to bend them to a better angle the plastic breaks and makes a spot where it will leak.
as far as the vents gas will eventually leak around them. i guess you could silicone them into place or something but the gas would probably eat through that too eventually. i've also heard of gas eating trough the rubber tire valve idea as well.
the no spill cans work the best because they make it easy to fill up anything no matter if the opening is straight up or at an angle.
Thanks for the info greatly appreciate it, I guess I have been lucky since none of mine has or needed a vent, plus not a single leak around the spout.
I will add some silicone around the vent when I get it installed.
2014 John Deere Z960R with 7 Iron Pro Deck
Chain Saws: "1973" 015 Mint, 029 Super Farm Boss, MS291, MS362C-M, MS441C-MQ with R Conversion
FS85R, FS110R, FS130R, FS250R
HU800WH 22" Self Propel Push Mower.
HU625HWT 22" Weed-eater on wheels.