|
#1
|
|||
|
|||
|
Wiring and Carb problems
I have a 385777-0349-31 21hp b&s engine that I just installed in place of the kohler on my turf tracer fmd603 s/n 134xxx (don't have anything off the motor). The b&s engine fires right up when starter fluid is sprayed in the carb but nothing other wise.
Also have some wires that I have no idea what they go to. Any help would be great. Let me know if there is any info I need to add |
|
#2
|
|||
|
|||
|
Don't know about the wiring, but if it fires with starter fluid, it sounds like you have a fuel delivery problem, not a wiring problem.
|
|
#3
|
|||
|
|||
|
Don't know about the wiring, but if it fires with starter fluid, it sounds like you have a fuel delivery problem, not a wiring problem. Of course, if those wires run your fuel pump, that could be the problem.
|
|
#4
|
||||
|
||||
|
You need to put power to the fuel cut-off solenoid and the regulator.....
![]() The white wire needs power in both the start and run positions.....
__________________
Quote:
![]() "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Last edited by Restrorob; 08-16-2012 at 09:07 PM. |
![]() |
| Bookmarks |
| Tags |
| b&s, carb, engine, wiring |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|
















Linear Mode
