Click for Weather
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#1
08-05-2012, 12:32 PM
|
|||
|
|||
|
Air compressor
Looking to buy a air compressor to use for home shop. Wondering what kind you guys use at home. Been using a 10 gallon harbor freight. Thanks for any replies. Mainly want to use it for blowing stuff off engine and taking blades off. I have a ir231c impact.
Posted via Mobile Device 
|
|
#2
08-05-2012, 12:47 PM
|
||||
|
||||
|
I use a 60 gal..3 1/2 hp upright from harbor freight...about $400 w/ warranty..
Posted via Mobile Device
|
|
#3
08-05-2012, 05:00 PM
|
||||
|
||||
|
I use a 60 gal. upright from Sears. Around 5 HP 240V, two stage pump. I don't remember the CFM, but its got plenty. Its about ten years old or so and still works great.
If you need any air at all, go with a two stage pump!
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!" ......AMF!
|
|
#4
08-05-2012, 05:13 PM
|
||||
|
||||
|
Mines about 13 cfm...belt driven 2 stage pump...over 5 years old...
Separate pump and motor setups are the way to go...I had a sears 6 hp integrated pump and motor setup and it lasted about as long as the warranty... It scattered and there was nothing to fix...nice tank though.... Posted via Mobile Device
|
 |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
