Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #21  
Old 09-17-2013, 10:13 PM
dutch1's Avatar
dutch1 dutch1 is online now
LawnSite Silver Member
 
Join Date: Dec 2004
Location: Jayhawk
Posts: 2,201
Jeff, on more than one occasion, I've broken down a tire on a rim by running over the tire with my front pickup tire, getting as close to the rim as possible. An assistant to stand on the outer portion of the tire and rim is helpful. Once broken down, snap a set of visegrips on the rim and use a pair of large screwdrivers to work away from the visegrip around the rim. Lubing the bead and the rim is helpful.

Yeah, a shop can do the job but I've never believed in paying for a job that I can accomplish myself.
Reply With Quote
  #22  
Old 09-18-2013, 02:28 AM
Breezmister's Avatar
Breezmister Breezmister is offline
LawnSite Bronze Member
 
Join Date: Jul 2007
Location: South Jersey
Posts: 1,207
Quote:
Originally Posted by Jeffandtamara View Post
The parts machine I found had 12x10 rims and tires.. Everything else crossed over just fine.
Go to the Equipment & Parts Marketplace on here and sell the rims. It should be the section just above this one.

Quote:
Originally Posted by Jeffandtamara View Post
Might consider a repair, but don't have equipment to get the tire off and on the rim. Not sure I could do it with out the right stuff...
If you are interested in buying the equipment, Northern Equipment or Gemplers, or Harbor freight...Just search for manual tire machines.


Quote:
Originally Posted by Jeffandtamara View Post
Any chance auto tire shops might have the equipment to take the tires off and repair rims???
That shouldn't be a problem for them, just stick on a machine and done.
__________________
.
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity

The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic

RTFM What a concept

Reply With Quote
  #23  
Old 09-24-2013, 10:24 PM
Jeffandtamara's Avatar
Jeffandtamara Jeffandtamara is offline
LawnSite Member
 
Join Date: Jun 2004
Location: KY
Posts: 26
Got-R-Done

Followed Breeze's lead...did the Wheel Weld Washer thing... Have mowed the Yard Once...Seemed to work, Wheel did not get loose. Checked multiple times..
Instead of this repair costing $550 Bucks.... I got away so far with just a little over $100.... So I am feeling pretty good. http://www.lawnsite.com/images/smili...e_flagge13.gif
__________________
jch
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:43 AM.

Page generated in 0.06159 seconds with 10 queries