Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #21  
Old 04-08-2014, 06:19 PM
ducnut ducnut is offline
LawnSite Bronze Member
 
Join Date: May 2013
Location: central IL
Posts: 1,076
Quote:
Originally Posted by whiffyspark View Post
Also the issue with wd and dump trailers is they are never loaded the same amount. When you set up a wd it's setup for the load you have.
That's true.

The easiest WD I've seen is the Andersen that I have. The tension is super-easy to do, but, does take time.

Quote:
Originally Posted by green_thumb View Post
ok. Is it the actually hitch rating I'm looking for? Or the actual rating on the mount? I recall getting a Reese 2 5/16 hitch that had a rating on it. Like 5K or something
You need to look at the actual hitch that's mounted to the frame. The rating will be stamped into it, somewhere. Then, the part with the ball bolted into it, and slides into the hitch, is called a drawbar. That needs to be as capable as the hitch, if you're plan on maxing out the hitch's capability. Also, you need to be sure your ball is rated for a like amount. So long as all three items in your setup are up to snuff, you should be good.
__________________
1st Class Lawn Service

'13 Hustler X-ONE, 60", Kohler ECV749 EFI
'05 Hustler FasTrak, 42", Honda GXV530
'13 Toro Timemaster 30"
'02 Lawn Boy SilverPro 21"
Stihl BR600 blower
Stihl BG55 blower
Stihl KM55R trimmer
Stihl KM55R Kombi system
Stihl MS180C chain saw
Stihl HS45 hedge trimmer
RedMax Reciprocator
Echo SRM225 trimmer
Echo GT-2000 trimmer
Gravely WB edger
'14 Ariens Compact 24" Sno-Thro
'08 Troy Bilt Squall 2100
'06 Chevrolet Silverado
'13 Bravo Star, 7'X12', V-nose
Reply With Quote
  #22  
Old 04-08-2014, 07:56 PM
green_thumb green_thumb is offline
LawnSite Member
 
Join Date: Apr 2008
Location: Syracuse, NY
Posts: 120
Quote:
Originally Posted by ducnut View Post


You need to look at the actual hitch that's mounted to the frame. The rating will be stamped into it, somewhere. Then, the part with the ball bolted into it, and slides into the hitch, is called a drawbar. That needs to be as capable as the hitch, if you're plan on maxing out the hitch's capability. Also, you need to be sure your ball is rated for a like amount. So long as all three items in your setup are up to snuff, you should be good.
ok. here we go. The drawbar reads 5,000# max trailer weight and 500# max tongue weight. and the ball reads 5k.
The picture is off the mount.Name:  photo(2).jpg
Views: 115
Size:  54.2 KB

Last edited by green_thumb; 04-08-2014 at 07:58 PM. Reason: my grammar sucks
Reply With Quote
  #23  
Old 04-08-2014, 08:05 PM
whiffyspark whiffyspark is offline
LawnSite Platinum Member
 
Join Date: Jul 2011
Location: Chesapeake beach
Posts: 4,741
Just replace it with a Titan. It's money well spent.
Posted via Mobile Device
Reply With Quote
  #24  
Old 04-08-2014, 09:26 PM
ducnut ducnut is offline
LawnSite Bronze Member
 
Join Date: May 2013
Location: central IL
Posts: 1,076
Quote:
Originally Posted by whiffyspark View Post
We have two inch combos and they have a little slop. But we just take it easy on them.
If you look at the underside of the coupler, there's a nut on the wedge that locks in the ball. If you tighten that nut, you tighten up the slack; no more slop.

Quote:
Originally Posted by green_thumb View Post
ok. here we go. The drawbar reads 5,000# max trailer weight and 500# max tongue weight. and the ball reads 5k.
The picture is off the mount.
You've got plenty of hitch, just not enough drawbar or ball. If it were me, I'd look into Andersen Manufacturing's options. They're made in the USA, unlike nearly every other hitch manufacturer on the market. It's really nice stuff.

I've been running their WD hitch, since last summer.
__________________
1st Class Lawn Service

'13 Hustler X-ONE, 60", Kohler ECV749 EFI
'05 Hustler FasTrak, 42", Honda GXV530
'13 Toro Timemaster 30"
'02 Lawn Boy SilverPro 21"
Stihl BR600 blower
Stihl BG55 blower
Stihl KM55R trimmer
Stihl KM55R Kombi system
Stihl MS180C chain saw
Stihl HS45 hedge trimmer
RedMax Reciprocator
Echo SRM225 trimmer
Echo GT-2000 trimmer
Gravely WB edger
'14 Ariens Compact 24" Sno-Thro
'08 Troy Bilt Squall 2100
'06 Chevrolet Silverado
'13 Bravo Star, 7'X12', V-nose
Reply With Quote
  #25  
Old 04-09-2014, 09:31 PM
Falcon50EX's Avatar
Falcon50EX Falcon50EX is offline
LawnSite Senior Member
 
Join Date: May 2009
Location: GA
Posts: 724
Quote:
Originally Posted by ducnut View Post
If you look at the underside of the coupler, there's a nut on the wedge that locks in the ball. If you tighten that nut, you tighten up the slack; no more slop.



You've got plenty of hitch, just not enough drawbar or ball. If it were me, I'd look into Andersen Manufacturing's options. They're made in the USA, unlike nearly every other hitch manufacturer on the market. It's really nice stuff.

I've been running their WD hitch, since last summer.
How hard is it to disconnect the trailer? Can you use the trailer jack to assist in the disconnecting/
__________________

Training them early
Reply With Quote
  #26  
Old 04-09-2014, 09:46 PM
whiffyspark whiffyspark is offline
LawnSite Platinum Member
 
Join Date: Jul 2011
Location: Chesapeake beach
Posts: 4,741
Quote:
Originally Posted by ducnut View Post
If you look at the underside of the coupler, there's a nut on the wedge that locks in the ball. If you tighten that nut, you tighten up the slack; no more slop.



You've got plenty of hitch, just not enough drawbar or ball. If it were me, I'd look into Andersen Manufacturing's options. They're made in the USA, unlike nearly every other hitch manufacturer on the market. It's really nice stuff.

I've been running their WD hitch, since last summer.
Was talking about pintles duc. No adjustments for them.

I've been wanting to pick up an Andersen soon
Posted via Mobile Device
Reply With Quote
  #27  
Old 04-10-2014, 12:37 AM
ducnut ducnut is offline
LawnSite Bronze Member
 
Join Date: May 2013
Location: central IL
Posts: 1,076
Quote:
Originally Posted by Falcon50EX View Post
How hard is it to disconnect the trailer? Can you use the trailer jack to assist in the disconnecting/
It's really easy. I just throw the wheel on the jack and crank it down to relieve tension on the preload chains. Once there's slack, just undo the clevises. Raise the jack enough to unweight and release the coupler. Then, it's just standard fare.

I almost never change preload, as there's not enough difference in ride with the variety of loads I carry. I can preload the hitch enough to unweight the rear wheels and do funny car-style burnouts. But, I only preload it enough to stop porpoising. I know it doesn't look like the design could apply that much weight to the front wheels, but, it can. This hitch setup is quiet and seamless, in its use.

Quote:
Originally Posted by whiffyspark View Post
Was talking about pintles duc. No adjustments for them.
Oh!
__________________
1st Class Lawn Service

'13 Hustler X-ONE, 60", Kohler ECV749 EFI
'05 Hustler FasTrak, 42", Honda GXV530
'13 Toro Timemaster 30"
'02 Lawn Boy SilverPro 21"
Stihl BR600 blower
Stihl BG55 blower
Stihl KM55R trimmer
Stihl KM55R Kombi system
Stihl MS180C chain saw
Stihl HS45 hedge trimmer
RedMax Reciprocator
Echo SRM225 trimmer
Echo GT-2000 trimmer
Gravely WB edger
'14 Ariens Compact 24" Sno-Thro
'08 Troy Bilt Squall 2100
'06 Chevrolet Silverado
'13 Bravo Star, 7'X12', V-nose
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:05 AM.

Page generated in 0.10963 seconds with 10 queries