|
#11
|
||||
|
||||
|
I just read my discription on what I was talking about, and punched myself in the face.
Here is the picture http://www.happytrailstrailers.com/images/product/SS200[1].jpg |
|
#12
|
||||
|
||||
|
edit: nevermind.
thought you were the guy whos hitch popped off and this is what he used
__________________
RJ All Day Gehl 5640 Mustang 940 2003 International 4300 dump 1989 International S1900 dump 2003 Ford F250 6.0 diesel www.rjfalcone.com |
|
#13
|
||||
|
||||
|
Quote:
Posted via Mobile Device |
|
#14
|
||||
|
||||
|
I also use that type of pin and have never had issues, only issue really is that someone can steal the reciever in a dash
|
|
#15
|
||||
|
||||
|
If any of you have an 04 250 chech the factory hitch...was wondering why ours was sagging and checked it...all bolts were missing nuts and the remaing two were finger tight...had just pulled the bobcat with it setup like this...forget chains, they would have just kept me from losing the receiver when the whole thing came off.
I replaced every nut with lock washers and new nuts. Posted via Mobile Device |
|
#16
|
||||
|
||||
|
wow, yeah good thing no one was hurt.
I had something similar happen to me about 6 years ago when I didn't know any better. We had one of those hitch pins where the end of it slides up, spring loaded kind of deal, works great when you actually slide the end up...not so great when you leave it sticking out flat so the hitch pin can slide back out. So anyway, I was towing an equipment trailer with a full sized backhoe (for my first time) down a back road, and the trailer hitch receiver pulled right off the truck, trailer tongue went smashing on the gravel, but the safety chains held strong and the trailer never took off. Nothing was damaged, no one got hurt, was able to jack the trailer back up and put the same pin back in and continue on down the road.
__________________
www.nelliganco.com |
|
#17
|
||||
|
||||
|
I have to say, that made me laugh pretty hard.
__________________
Tom Anyone can run equipment, very few can operate. Check out what I do. http://www.youtube.com/user/BobcatNinja2124 Facebook Fan Page http://www.facebook.com/BobcatNINJA The company I work for. http://www.interstatelandscapenh.com/ |
|
#18
|
||||
|
||||
|
dude get a lock that goes through the hole i have been using them for years. then you know it wont fall out
__________________
2011 hd2500 chevy 2008 28 kaw 60 ULTRA CUT exmark. 2008 28 kaw 60 ULTRA CUT exmark. 90 chevy 1 ton truck 89 chevry half ton 85 i ton dump 16 hp leaf loader 3 snow plows, 2 salt spreader 8 x 20 enclosed carmate trailer, red with refrigirator 2 little wonders 10briggs ( boo) and 9hp honda 21 inch com. toro with susuki engine. 30 inch time cutter ,echo weedeaters and still backback misc tools. cuttin evrey summer since i was 10. now 39.
|
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|
















Linear Mode
