Adding Or Changing Buttons On E/H Controls

[Daner]

Have you ever changed ar added buttons on your pilot or E/H controls?

I have a Case TR270 and on the left side controler I have 3 buttons,
2 are for 2 cylinders or 2 motors, but the 3rd is a switch that you can position on or off.
The 3rd switch is the one that I would like to swap to a cylinder button,
ie, up to send the signal to extend, down to retract the hyd cylinder.

I need to operate 4 double acting cylinders from inside the cab on the sticks.

any Ideas?

[ksss]

I would suspect it would be nothing more than swapping out the switch. How are liking the 270?

[Daner]

Originally Posted by ksss

I would suspect it would be nothing more than swapping out the switch. How are liking the 270?

I too would think the switch could be changed, but I was told the harness had to be changed,
But I could tell he was not 100% sure, and they were very busy.
I need to opperate 4 cylinders on my tree digger and want to use those handy switchs.
I love this Case machine, I dont have many hrs on it just yet, but it can sure lift plus its a treat to drive.

Did you not have some switchs added to your machine for your mulcher?

[ksss]

It only needs the standard aux. switch