exmark died while mowing

[nick9346]

I have a 2005 exmark 72 inch with 28hp kohler. I was cutting grass and it acted as if i turned key off and died out. Now I have no power at all not even when I turn key to on spot. I seen two fuses a 30amp and 10amp both are okay. No power at ignition switch. seat safty switch bypassed. parking brake switch ok. Im lost so any pointers would be helpfull. Thanks

[cgaengineer]

Sounds like an ignition problem...does it have spark?
Posted via Mobile Device

[nick9346]

Originally Posted by cgaengineer

Sounds like an ignition problem...does it have spark?
Posted via Mobile Device

wont turn over .NO power anywhere but starter

[CraigPLC]

Trace the ignition line, it has a inline fuse... If that is ok, its probably the presence switch is out on the handles. My Bad Boy has a magnet and the magnet fell out and it did the same thing. Put a new magnet in And life is good.
Posted via Mobile Device

[TriCountyLawn]

How did you get it back on the trailer ?

[cgaengineer]

Originally Posted by TriCountyLawn

How did you get it back on the trailer ?

Loosen the two bolts on the rear of the hydro pumps.
Posted via Mobile Device

[chesterlawn]

I had that happen before and it was the pto switch. Not saying that is your problem, I forget how to test it.

[mowisme]

just couple things..no power to switch might be starter selonoid if not switch. If by chance your tester had a bad contact for ground and you accually do have power at 'on'..then could be several things (siezed motor-turn by hand to see, bad starter, weak ground somewhere) just a couple non-professional thoughts

[cgaengineer]

Could be gremlins...also someone may have let the smoke out of some of the electrical wiring.
Posted via Mobile Device

[MRCOONASS48]

The same thing happened to me on 27hp exmark 50". It was the voltage regulator, but I changed the stator also. Then it ran fine.