ocd cant get deck leveled everride / gravely

[grass disaster]

on warrior

so i did as instructed in the book.

got the front pretty level
got the 1/4 higher in the back right but the back left is giving me issues.

back left is about 1/2" higher than the front left.

i'm not sure if the deck is bent or if its just a bad design from mounting positions.

either way its better than what it was so i might just have to live with it.

[Jimslawncareservice]

Did you level side to side first?
Posted via Mobile Device

[grass disaster]

Originally Posted by Jimslawncareservice

Did you level side to side first?
Posted via Mobile Device

Yup. Did that.
It was driving me crazy. I think the deck must be tweeked or I have a spindle tweeked. A little.
Posted via Mobile Device

[Ijustwantausername]

Originally Posted by grass disaster

on warrior

so i did as instructed in the book.

got the front pretty level
got the 1/4 higher in the back right but the back left is giving me issues.

back left is about 1/2" higher than the front left.

i'm not sure if the deck is bent or if its just a bad design from mounting positions.

either way its better than what it was so i might just have to live with it.

I did the exact same thing to my Cheetah on Fri. I noticed the R side was scalping and sure enough it was about 3/4" lower than the L side, plus the R side tire had 15.5 PSI and the L side had 21 PSI . I went back and forth and back and forth with a tape measure trying to get it right. Finally I got them within 1/16" of an inch to each other, still not exactly the same though!

[grass disaster]

I don't think u could notice unless its greater than 1/4 on the front.
So 1/16 is pretty sweet if u ask me.
Posted via Mobile Device