Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 10-12-2013, 12:08 PM
sgbotsford sgbotsford is offline
LawnSite Member
 
Join Date: Aug 2012
Location: Alberta, Canada
Posts: 102
Sprinkler catch can data?

I've been playing with WinSIPP2 from Senninger, and it has been an eye opening experience. Getting reasonable DU (>85%) and SC (<1.5) is non-trivial.

If you've not used the package, it allows you to try out various sprinkler arrays then calculateds the densogram and DU, CU, and SC for the plot. In addition, mousing over any location will give you the application rate.

I've found a few interesting tidbits:

1. Many senniger sprinklers have a heavy watering area 2-3 feet in radius from the rotor. Spacing the sprinklers 1 radius apart is a bad idea. You get a soggy spot at each rotor. Spacing a few feet more than 1 radius works better for this kind of distribution.

2. Even with sprinklers that have a fairly flat distribution, spacing is critical. I could get uniformity differences of 10-15% by changing the spacing 2 feet.

Unfortunately, Senninger doesn't have small sprinklers (Under 30 foot radius throw) that do partial arcs.

Anyone know of a software package that has sprinkler data for other brands?
Reply With Quote
  #2  
Old 10-14-2013, 10:31 AM
Kiril Kiril is offline
LawnSite Fanatic
 
Join Date: Jun 2007
Location: District 9 CA
Posts: 18,318
http://www.fresnostate.edu/jcast/cit...are/index.html
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:24 AM.

Page generated in 0.05772 seconds with 9 queries