#1




gravel drive
I know this is in the wrong forum but it will get seen here faster. I have a spot at my house i want to make into a parking spot for my work truck. I have a small driveway and have a car a work truck and a SUV to park. I can only fit the wifes car and my SUV now. how should i go about making this drive? Lay plastic over the weeds and grass then the gravel or kill off all weeds and grass and lay gravel. I have 200 sq.ft to do. And about how many yard of gravel will i need to do at 2 inches. I was also wodering about making a border so the gravel wont spread
__________________
Darrin, DRP MOWING.. 2010 Chevy Siverado 1500. 7.5 Fisher plow. 2009 Chevy Silverado 2500 HD with fisher XBlade J.D.920A Ztrak 54 in./ 48 in. Great Dane Super Surfer 
#2




here is the orig drive and the spot were i want to put the work truck
__________________
Darrin, DRP MOWING.. 2010 Chevy Siverado 1500. 7.5 Fisher plow. 2009 Chevy Silverado 2500 HD with fisher XBlade J.D.920A Ztrak 54 in./ 48 in. Great Dane Super Surfer 
#3




If I"m figuring right 1.5 cu. yds. will do 12x20 area 2" thick or slightly thicker,
make it 2yds for variable depths, dump it right over the weeds & grass anything comes thru just spray with round up after. I would think if you wanted to keep it contained run a row of retaining blocks, that would probly look pretty nice. some reason 2yds just don't sound right to me but I can't figure out why. 
#4




i just dont want the gravel or stne to just sink in the ground when i drive on it.
__________________
Darrin, DRP MOWING.. 2010 Chevy Siverado 1500. 7.5 Fisher plow. 2009 Chevy Silverado 2500 HD with fisher XBlade J.D.920A Ztrak 54 in./ 48 in. Great Dane Super Surfer 
#5




Remove the topsoil off the area, add 411 limestone which are fines and dust and water then tamp, this will turn the 411s into almost a concrete base. Then top with either #57s or the smaller #8, the 57s are 3/4" and bond toghter better than 8s. You will need at least 5 tons of the 411 to form the base maybe more if you have alot of topsoil to remove. Removal of the top soil will prevent the stone from sinking out of sight

#6




to find out how many yards do Length x Width x Heighth, in feet. so thats cubed. Then divide by 9 and thats how many yards you need.
for instance, if you had 12x12, and wanted it 4" deep. you do 12'x12'x4/12 so that is 48ft cubed. then I divide by 9 and thats 5 1/3 yards you need. hope this helps you figure out how to do the math to figure out how many yards you need. 
#7




Quote:
some reason that amount just seems low to me, but everytime i refigure it I get the same answer. 
#8




well lets see. 12'x20'x2/12 (2/12 because 2" is 2/12 in feet) is 40, then divide that by 9 and you get 4.44. So from my calculations thats 4.44 yards you need, I'd order 4.5 yards.
I think you did 12x20x2/12 then you divide by 27... but you only divide by 27 when your doing inches, and sense you were doing feet, you divide by 9. Now that I think about it... Im wrong, your right. You do divide by 27 at the end, I dont know why I thought divide by 9. or you can do 12x20x2 then divide by 324 Last edited by RedWingsDet; 03272005 at 07:19 PM. 
#9




Quote:
__________________
Skantisco Lawn  "Que scaisje?" 
#10




actually. I was talking to my bro, and he said I was right at first. because sense its a cubic yard, I guess you do divide by 9 at the end.
Now I got alotta people thinking about this prolly. LOL... but in my oppinion, I think its 12x20x1/6 divide by 9.... which is 4.5 cubic yards. thats what I think personally. but I may be wrong. 
«
Previous Thread

Next Thread
»
Thread Tools  
Display Modes  

