Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-03-2005, 10:07 PM
MarcusLndscp's Avatar
MarcusLndscp MarcusLndscp is offline
LawnSite Senior Member
 
Join Date: Aug 2004
Location: New England
Posts: 636
Outdoor BBQ

Does anyone have any details on building an outdoor BBQ. Would like one with a chimney and to appear to be built out of natural stone, but I know that heat will crack some stones. Ventilation in the bottom is needed correct? Do I need to use a fire brick for the interior? All the way up the chimney? Any info would be appreciated.
Thank you
Mark
Reply With Quote
  #2  
Old 04-03-2005, 10:27 PM
Residential Recreation's Avatar
Residential Recreation Residential Recreation is offline
LawnSite Member
 
Join Date: Mar 2005
Location: elkhart indiana
Posts: 74
i would reccomend using firebrick all the way up the chimney but remember to leave weep holes and enough space between the brick and stone
Reply With Quote
  #3  
Old 03-25-2006, 10:57 PM
Seabass2500 Seabass2500 is offline
LawnSite Member
 
Join Date: Aug 2004
Location: Indiana
Posts: 15
I have searched and read the few outdoor fireplace posts but there are never much to them. Can anyone elaborate on any basic building suggestions or issues to be cautious of.

Thanks.
Reply With Quote
  #4  
Old 03-26-2006, 06:00 AM
cedarcroft cedarcroft is offline
LawnSite Senior Member
 
Join Date: Jun 2005
Location: Huntington, NY
Posts: 442
I have never built an outdoor fireplace/BBQ but I had one at my old house. It was made of natural, native stones and it seemed to be fairly well built. It was one of the main reasons I bought the house. Un fortunatly there was no heat protection in the chimney. One night (after a few cocktails) in the winter we cranked up a big fire and it heated the chimney up so much that the whole thing collapsed. It was only about 6' high so no one got hurt but the moral of the story is to use ceramic sleeves or fire brick to insure long life. also don't stuff the BBQ area with logs and busted up pallets and use gas as an accelerant.
just some tips.
__________________
Project manager
http://www.deckandpatio.com/
Moonlighter Extraordinaire
Reply With Quote
  #5  
Old 03-26-2006, 07:02 AM
treedoc1's Avatar
treedoc1 treedoc1 is offline
LawnSite Senior Member
 
Join Date: Feb 2004
Location: Northern VA
Posts: 319
This client wanted a massive column and integrated into their existing wall. The interior of the fireplace is covered with firebrick at the end. A special additive is added to the mortar mix for heat tolerance. The red clay is a chimney insert and is heat tolerant. The cinder block is all veneered normally.

PM me if you need more info.
Attached Images
 
Reply With Quote
  #6  
Old 03-26-2006, 07:15 AM
MarcusLndscp's Avatar
MarcusLndscp MarcusLndscp is offline
LawnSite Senior Member
 
Join Date: Aug 2004
Location: New England
Posts: 636
Wow, pretty extreme Treedoc. Just like a regular chimney/fireplace is built basically. Knowing your stonework I bet that looked awesome when it was completed. I was just wondering because you sometimes see old school outdoor fieplaces that have no firebrick and appear to have been around for many many years. You just add fire clay to your mortar right?
Reply With Quote
  #7  
Old 03-26-2006, 08:58 PM
dcondon's Avatar
dcondon dcondon is offline
LawnSite Silver Member
 
Join Date: Apr 2003
Location: Mid-Michigan
Posts: 2,247
Looks great Treedoc!!!!!!! Lets see some pic's when you get it all done
__________________
Git-R-Done!!!

fluid film- the official sponser of sflqpru
Reply With Quote
  #8  
Old 03-26-2006, 09:55 PM
treedoc1's Avatar
treedoc1 treedoc1 is offline
LawnSite Senior Member
 
Join Date: Feb 2004
Location: Northern VA
Posts: 319
Yes to the additive.
I also have seen some outdoor fireplaces without firebrick, but they always seem to have an extra large firebox, that might diffuse the heat.
Reply With Quote
  #9  
Old 03-27-2006, 11:05 PM
Seabass2500 Seabass2500 is offline
LawnSite Member
 
Join Date: Aug 2004
Location: Indiana
Posts: 15
Hey Treedoc,

How do you cover up your lintel (besides the veneer on the front)? Do you just leave it exposed in the firebox? And how do you finish off the ceiling of the firebox, where the block is, and the lintel.

Another question... I was planning on an arched opening built over a wooden temporary structure. The chimney would be about 1/2 the size of your picture, with a smaller insert stack. I was thinking it would be plenty strong to hold the weight of the chimney... do you think i'm ok there?

Thanks!
Reply With Quote
  #10  
Old 03-28-2006, 09:02 PM
treedoc1's Avatar
treedoc1 treedoc1 is offline
LawnSite Senior Member
 
Join Date: Feb 2004
Location: Northern VA
Posts: 319
Cover all exposed interior with firebrick mortared in place, lintel also.

Here is some spare time work we did on our tool shed. Frame out the arch and hold it up with 6x6. Shape and place the stones with out mortar first to get the tightest fit. I like to let it cure for a week prior to removing the wooden form.
Attached Images
   
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:05 AM.

Page generated in 0.09847 seconds with 8 queries