Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-19-2005, 09:25 PM
rlmelton rlmelton is offline
LawnSite Member
 
Join Date: Mar 2003
Location: oklahoma
Posts: 30
Redmax BCZ3000 bogging down

I recently purchased 2 new Redmax BCZ3000s trimmers. When I fired them up to run them they both were running ragged. Bogging down and hesitating when you throttled them up. Is there a carb adjustment on these new trimmers that I'm not aware of? Also is there a manafacture forum on Redmax that I could get some info on?
Reply With Quote
  #2  
Old 04-19-2005, 09:46 PM
TURF DOCTOR's Avatar
TURF DOCTOR TURF DOCTOR is offline
LawnSite Silver Member
 
Join Date: Aug 2003
Location: BEREA KY
Posts: 2,141
No carb adjustments check your fuel or your plug pull the screen out of the muffler.
Reply With Quote
  #3  
Old 04-19-2005, 11:21 PM
Tider6972 Tider6972 is offline
LawnSite Senior Member
 
Join Date: Jul 2001
Location: Alabama
Posts: 651
Sounds like fuel supply getting air (cap?) or a vacuum leak.

You say these are 'new', low-to-zero hours units (?), so the fuel is fresh, right?
Reply With Quote
  #4  
Old 04-20-2005, 06:59 AM
Oldtimer Oldtimer is offline
LawnSite Bronze Member
 
Join Date: Apr 2000
Location: Pensacola, Florida
Posts: 1,386
All new 2 stroke equipment needs a few seconds to a minute or two to purge the air from the fuel system.

The dealer should have fueled your trimmers and had them running properly before leaving the store. We have sold around 1500 pieces of 2 cycle equipment during the last 7 months and every unit was started prior to delivery. We had 4 units that went to recheck and were repaired prior to delivery and 1 unit that was returned and exchanged after delivery.

Don't leave the store without allowing the dealer to start and run everything with an engine on it.

If you bought your trimmers on line then your closest dealer will get the units running properly after he services all his loyal customers.



Oldtimer
Reply With Quote
  #5  
Old 04-20-2005, 08:27 AM
Mower Man Mower Man is offline
LawnSite Member
 
Join Date: Jan 2005
Location: Mid Atlantic State
Posts: 100
No carb adjustment....none really needed if set up, operated, and maintainted correctly.

Some 3000's got out with the wrong shield/cut off leaving too much line out. Eventually the spark arrestor loaded up, and even the piston/cylinder got coated with baked on oil from blowby. That extra friction would bog it down.

Check with dealer.

If coated bad enough....internals would have to be chemically, and maybe manually cleaned.
__________________
We are what we repeatedly do. Excellence is not an act, but a habit.
Reply With Quote
  #6  
Old 04-24-2005, 12:36 PM
Oldtimer Oldtimer is offline
LawnSite Bronze Member
 
Join Date: Apr 2000
Location: Pensacola, Florida
Posts: 1,386
Brian,

Are you telling all RedMax users not to run Amsoil, Optimol or any other 100:1 mix oil? As a RedMax rep you are representing your company's stance regarding these products.

Oldtimer
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:51 AM.

Page generated in 0.08043 seconds with 7 queries