|
#1
|
||||
|
||||
|
Brakes squeaking
Quick question, I've noticed that I have an excessive amount of break squeal when I apply the brakes on my WB. What can I do to eliminate this? I've tried belt dressing on the drums, and even that stuff you use for automotive brakes but it is WAY too sticky. Any suggestions??? TIA
__________________
2008 Bad Boy Lightning 26hp/60in - Powerchute w/custom in-grip switch - Hella fog lights - Custom striping roller - Pingel fuel filter - Custom FIMCO boomless spray rig 1989 John Deer 1070 Compact Tractor - 40hp/4WD - 70 series loader - 506 rotary mower - box scraper - 84" plow w/full hydo - ballast box - aux lights 1993 John Deere Gator 6x4 - HD Field Trax tires - brush/fender guards - hydraulic dump bed w/storage and bed cover - 2" receiver hitch - HD front suspension |
|
#2
|
||||
|
||||
|
Squealing comes from vibration.
Check to see if linings are square with the drum when applied. Linings could be glazed or down to metal.
__________________
Cub M60 Tank Wright Stander 36" RH Cub G1336 WB w/sulky Cub 21" Lawnboy 21" Cub trimmers Cub hedge trimmer Cub chain saw Poulan chain saw Stihl hedge trimmer Kawasaki blower Homelite handheld Southwest 7x16 Enclosed "04" F150 5.4 8' bed Assorted other moneymakers Porti Potty (very important)
|
|
#3
|
||||
|
||||
|
I inspected the brake bands and the drums. All looks good. I sprayed it down with brake cleaner then added a dab of lithium grease. It worked fine, however, by the time I finished my yard it was squeaking again. Looks like I'll have to live with it until I replace the brakes. I may pull it all apart and look more closely at the bands to see if they are glazed.
__________________
2008 Bad Boy Lightning 26hp/60in - Powerchute w/custom in-grip switch - Hella fog lights - Custom striping roller - Pingel fuel filter - Custom FIMCO boomless spray rig 1989 John Deer 1070 Compact Tractor - 40hp/4WD - 70 series loader - 506 rotary mower - box scraper - 84" plow w/full hydo - ballast box - aux lights 1993 John Deere Gator 6x4 - HD Field Trax tires - brush/fender guards - hydraulic dump bed w/storage and bed cover - 2" receiver hitch - HD front suspension |
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|












Linear Mode
