Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 07-06-2005, 12:12 PM
firest04 firest04 is offline
LawnSite Member
 
Join Date: Jul 2005
Location: Jacksonville,NC
Posts: 1
Help needed on John Deere mower

I have a JD LX279 that needs the clutch replaced. I have gotten the bolt out of the bottom of the clutch, but don't know how to pull off the clutch assembly. Anyone with any info would be greatly appreciated.
Reply With Quote
  #2  
Old 07-06-2005, 12:26 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,517
Quote:
Originally Posted by firest04
I have a JD LX279 that needs the clutch replaced. I have gotten the bolt out of the bottom of the clutch, but don't know how to pull off the clutch assembly. Anyone with any info would be greatly appreciated.

Spray some WD 40 up in the center of the clutch, Tap on the side with a hammer while prying down with a large screw driver or some sort of pry bar and if your lucky it will slide off. Put a light film of grease on the shaft before installing the new one to make it easer next time.
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 04:05 AM.

Page generated in 0.06304 seconds with 7 queries