Advanced Search

The Green Industry's Resource Center

Old 09-18-2005, 02:43 PM
dlandscaping dlandscaping is offline
LawnSite Senior Member
Join Date: Aug 2001
Location: mass
Posts: 835
Toro 2 cycle 21" repair cont

I finished putting together one Toro 21" by from the existing: all but cranshaft, from the 4 year older one: the crankshaft and I bought new rings. Underneath, I used the BBC from the other one, because the spindle that went on the shaft first, would move freely if I used that one. The problem is, now it starts up and runs, but whenever I try to engage the blades it dies. In the crankshaft, I put the two clips into the bar above it, and then the governor from the outside that goes in, I put that above the circle thing that those 2 clips are in. I did not have a book and the pictures on were hard to see. Its model 22043 and numbers 10 and 11 that I am talking about on the crankshaft assembly page. Help is appreciated, mowing hills is hard with a homeowner model.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 11:44 AM.

Page generated in 0.05368 seconds with 8 queries