Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 03-04-2006, 10:21 AM
robertbc robertbc is offline
LawnSite Member
 
Join Date: Feb 2006
Location: cape cod ma
Posts: 17
new guy getting started

I am just starting sealcoating as an add on of services.I been reading the post but stll confused on eguipment.A little background I want to do just driveways.Live on Cape Cod its always windy so could anybody give me advice on eguipment(55gl drums tank , starseal begiiers kit $1000
thks for any help would be appr.
Reply With Quote
  #2  
Old 03-05-2006, 03:55 PM
joeE joeE is offline
LawnSite Member
 
Join Date: Jan 2006
Location: NW lower MI
Posts: 45
Robert
Do you want to broom & or spray? Hard to spray in the wind.
What equipment are you looking at?
Do you have a sealer dealer near you?
Any other info that would help us help you?
Reply With Quote
  #3  
Old 03-05-2006, 04:39 PM
robertbc robertbc is offline
LawnSite Member
 
Join Date: Feb 2006
Location: cape cod ma
Posts: 17
joeE thks for responds.I think i will brush just doing driveway.REally do not want touse 5gl buckets because of cost I cant find any dealers in my area(cape cod ma) so i was thinking of some sort of tankAny help would be great thks
Reply With Quote
  #4  
Old 03-06-2006, 10:46 AM
joeE joeE is offline
LawnSite Member
 
Join Date: Jan 2006
Location: NW lower MI
Posts: 45
Robert
Sounds like you want to use a tank. Thats good. I would strongly suggest a steel cylinder with shaft & arms for mixing. I know you will be happy with it.
Any other type will be temp, until you wind up with a steel cylinder. After 7 years of sealing I couldn't imagine using a square tank. But thats just me, I see some guys have a different opinion on them. Maybe some of them will
offer there opinion so you get both sides.
Now, just about anything will work, the question is how much time & effort do you want put into mixing. If it doesn't get mixed well each & every time,
you will not get a good job. I flip a lever when I get to the job, that mixes it for me (hydraulic agitation), while Iam off getting the drive prepped. Ive seen guys mixing buckets, dipping buckets into 55 gal drums,ect,ect. I think thats wasted time, I know at the end of the day, I get one or two extra drives done. It would be wise to use that extra money to make your job easy.

Raw sealer is so thick it stacks, (not self leveling). The mixed product is not that thick but its still pretty thick. Add some sand and the mixing process is not a easy task. For that reason alone, I cant see how a square tank with re-circulating agitation could be effective, but thats just me.
So once you have a tank, you will need to fill it. I would call the 2 or 3 nearest sealer manufacturers and ask for the nearest distributors to you. Thats just another coater with a bulk tank. Check price for the amount of sealer you will purchase. Sealer weight is about 10.3 lbs per gal.
Reply With Quote
  #5  
Old 03-08-2006, 11:02 AM
robertbc robertbc is offline
LawnSite Member
 
Join Date: Feb 2006
Location: cape cod ma
Posts: 17
Thanks joeE.Saw a tank on ebay 860. i would like to spray assume faster. I read in some post people charge 10 15 and 20 per sqft .Do you mean for one coat or 2 .I have been reading man specs say 2 coats. So you would charge for both coats right?
.
Reply With Quote
  #6  
Old 03-08-2006, 05:58 PM
joeE joeE is offline
LawnSite Member
 
Join Date: Jan 2006
Location: NW lower MI
Posts: 45
Robert
That seems to depend on location, in my area its
.05 - .07 for lots....for 1 coat...... & .07 - .09 for 2
.06 -.08 for drives
I do 1 coat on drives, 2 on lots. The 2nd coat will take less time & sealer.
I use time & materials for charge rate.

I don't know what the .10 .15 .20 means but I sure wish I could make that much. Maybe thats the going rate for your area, but I would do more research.

Call 2 -3 closest sealer manufactures. They want to sell you sealer even if its
thru a distributor, they are very helpful & will know the going price per sq ft.
I buy 4,000 gal at a time direct from the closest manufacture to me which is about 200 miles away. He was able to tell me the going rate in my area when I first got started. Plus a lot more helpful info.
Reply With Quote
  #7  
Old 03-10-2006, 08:33 AM
robertbc robertbc is offline
LawnSite Member
 
Join Date: Feb 2006
Location: cape cod ma
Posts: 17
Is it possible to staret off with 300 gl tank and brush driveways,?I dont have the funds for the whole sysyem.MY other ? what would be the best way to get sealer out of tank? thks
Reply With Quote
  #8  
Old 03-10-2006, 02:44 PM
joeE joeE is offline
LawnSite Member
 
Join Date: Jan 2006
Location: NW lower MI
Posts: 45
What kind of tank? What kind of openings?
Reply With Quote
  #9  
Old 03-10-2006, 04:38 PM
robertbc robertbc is offline
LawnSite Member
 
Join Date: Feb 2006
Location: cape cod ma
Posts: 17
It would be 300gal steel tank with hand crank. 2inch opening
Reply With Quote
  #10  
Old 03-10-2006, 10:10 PM
joeE joeE is offline
LawnSite Member
 
Join Date: Jan 2006
Location: NW lower MI
Posts: 45
Do you mean like, ball valve, 2" pipe, elbow & down tube for bucket filler?

Or are you speaking of old dry sealer?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:01 PM.

Page generated in 0.09808 seconds with 7 queries