Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 03-17-2006, 11:14 AM
bigviclbi bigviclbi is offline
LawnSite Senior Member
 
Join Date: Jan 2005
Location: nj
Posts: 886
stuck spindle

1993 f-350 460 4x4

the spindle will not come off for anything. penetrating oil, torch, rubber mallot. Any tricks to get it off?
Reply With Quote
  #2  
Old 03-17-2006, 03:19 PM
CLARK LAWN's Avatar
CLARK LAWN CLARK LAWN is offline
LawnSite Silver Member
 
Join Date: Oct 2005
Location: youngstown, ohio
Posts: 2,524
are you sure your taking the spindle off and not the wheel bearing the spindle is held in place with the ball joints. to pop the ball joints remove the cotter pin and the nut and hit the outside of the knuckle with a small sledge hamer a few times if it is the lower one be sure you have a jack under it to hold the spring pressure. if ti the wheel bearing make sure you have the bolts out and use a hammer and a flat chiesel and beat all the way around till it comes off
__________________
www.clarklawn.com

join us on FACEBOOK www.facebook.com/ClarkLawnMaint
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:33 AM.

Page generated in 0.05647 seconds with 7 queries