Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 03-30-2006, 07:33 PM
Metalmacguyver Metalmacguyver is offline
LawnSite Member
 
Join Date: Feb 2006
Location: plymouth MA
Posts: 45
part numbers, Help!

i need some part numbers asap. the local repair shop that i normally go to for my parts and assistance when fixing is in the middle of moving into a new building so they are closed for the week.

i need a starter solenoid and mower deck belt for a scotts tractor.
S1742 or 1742G date-041699
serial-Gx1742S026580

i also need a carb rebuild kit for a toro push mower. there is no indication of who made the engine so im guessing it could be honda (made in japan right?) or a toro made engine. the numbers are VMF5-128244

i also need a carb kit and the throttle lever/trigger for a small McCulloch chain saw.
Model-600091C
serial-11-10307

thanks ahead of time for the help!
Reply With Quote
  #2  
Old 03-30-2006, 10:50 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,778
I don't haves parts look-up on these units, Well maybe the Toro if I had the model number off the deck. They have the engine break-down with the deck assembly. I did do a web search on the other two and still came up empty.
I tried.....
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #3  
Old 03-31-2006, 12:02 AM
Metalmacguyver Metalmacguyver is offline
LawnSite Member
 
Join Date: Feb 2006
Location: plymouth MA
Posts: 45
ok thanks. i will have to wait till my shop is open again. saturday or monday.

as far as a deck number on the toro, i cant find it. it was probably somewhere on the rear of the machine right? well i think i know where it was and there is some pretty deep pitting in the aluminum of the deck. the engine had the tags GTS and OHV on it. all else i know is that its a 21" cut and a rear bagger. Thanks again!
Reply With Quote
  #4  
Old 03-31-2006, 12:16 AM
lucforce lucforce is offline
LawnSite Member
 
Join Date: Mar 2006
Location: Mobile AL
Posts: 225
The engine that you have was made by suzuki. That was an outstanding and expensive mower in its day.
Reply With Quote
  #5  
Old 03-31-2006, 09:19 AM
Metalmacguyver Metalmacguyver is offline
LawnSite Member
 
Join Date: Feb 2006
Location: plymouth MA
Posts: 45
Suzuki?!? never heard of suzuki into anything smaller than dirtbikes. do you know if there is any parts support still around for it and how old the mower actually is? as far as being and outstanding mower, i can say that it still is! (just needs a little TLC)
Reply With Quote
  #6  
Old 03-31-2006, 01:28 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,778
The only place I know of to get Suzuki parts is from a Toro dealer with the deck number. You may get lucky and have a dealer look at the unit and maybe he can identify which model it is. Toro parts look-up is a pain in the arss without model numbers.
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #7  
Old 04-01-2006, 12:40 AM
Metalmacguyver Metalmacguyver is offline
LawnSite Member
 
Join Date: Feb 2006
Location: plymouth MA
Posts: 45
ugh! thanks for the heads up. ill bring it with me when i go for parts.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:59 AM.

Page generated in 0.08165 seconds with 9 queries