Go Back   LawnSite.comô - Lawn Care & Landscaping Business Forum, Discuss News & Reviews > Sponsor Forums - Discuss with Sponsors Directly > Lawn Mowing Equipment & Accessories * * * * SPONSOR FORUMS > Magna-Matic
User Name
Password
Register FAQ Calendar Mark Forums Read


Magna-Matic Lawn Mower Blade Balancers, Sharpeners, and more

Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2006, 11:39 PM
CrewCutEnterprises CrewCutEnterprises is offline
LawnSite Senior Member
 
Join Date: Feb 2004
Location: Annapolis
Posts: 894
RBG 121 or Magnamatic 9000

Hey I wanted to know the current price on the 9000's. Ive used a RBG grinder before and it was easy, simply and fast but everyone loves the magnamatic.

Anything i should know that would sell me on the magna matics?

I have blades for 36 48 62 inch mowers
__________________
Tk 1 99 F350 7.3 Diesel with Ez-dumper, 7.5 Western
TK 2 99 F250 V8 Gas
Tk 3 98 Explorer 4.0 liter 4x4
Tk 4 98 Explorer 4.0 liter 4x4
Tk 5 96 Ford F250 Xcab long bed
Tk 6 97 Ford F250 Single Cab, 4x4 With 7.5 ft Fisher
Tr 1 - 16 ft Mowing trailer
Tr 2 - 12 ft dump trailer
Tr 3 - 10 ft utility trailer
Tr 4 - 12 ft Mowing trailer
Tr 5 - 18 ft Skid loader trailer
1992 Case 1840 Skid loader

Jason Rohrbaugh
Crew Cut Enterprises LLC.

Annapolis, Maryland
Reply With Quote
  #2  
Old 05-31-2006, 11:50 PM
6'7 330's Avatar
6'7 330 6'7 330 is offline
LawnSite Bronze Member
 
Join Date: May 2005
Posts: 1,829
IMO Magnamatic, is the best.Following The cut off edge produces the perfect angle every time. You have to idiot to burn a blade on the magnamatic. The magnamatic sharpener, balancer are the super one-two punch of blade maintenance equipment.
Reply With Quote
  #3  
Old 06-01-2006, 01:52 PM
Magna-Matic's Avatar
Magna-Matic Magna-Matic is offline
Sponsor
 
Join Date: Jul 2001
Location: Waldo, Wisconsin
Posts: 798
Here is the information (price and specs) on the MAG-9000

http://www.magna-matic.com/sharpener...000/index.html

Here is the manual to review its use.

http://www.magna-matic.com/support/p...tructions.html

As was mentioned above, a Magna-Matic sharpener will sharpen more quickly than an RBG, it will not burn the blade, and it will provide you with a consistant 30 degree angle every time. The RBG must be set and measured between every blade because it raises and lowers the wheel on a vertical axis in to a slotted hole.

See design differeneces here:
http://www.magna-matic.com/sharpener...ifference.html

We also intensely support our customers and products, with Magna-Matic you can call the factory and actually speak to humans about the product and get help with a problem, and order direct.

Let me know if you have more specific questions, or call me 800-328-1110 to discuss the sharpener.

Thank you,
__________________
Gerd Ferdinand Bauer II

Magna-Matic Corporation
Waldo WI USA
800-328-1110 (toll free USA & Canda)
920-564-2366 (PHONE)
gbauer2@magna-matic.com
www.magna-matic.com
www.magna-matic-direct.com
www.youtube.com/magnamaticcorp
Reply With Quote
  #4  
Old 07-27-2006, 07:02 PM
CrewCutEnterprises CrewCutEnterprises is offline
LawnSite Senior Member
 
Join Date: Feb 2004
Location: Annapolis
Posts: 894
Hey I wanted to know if there are any specials going on.

Im still on the fence of an RGB grinder and the magnamatic. Ive never used a magnamatic and Im concerned in its performance. do the grinding wheels come with the angle grinded on them already. since the blades are grinded at an angle, unlike the RGB, I Would like to buy one next week.
__________________
Tk 1 99 F350 7.3 Diesel with Ez-dumper, 7.5 Western
TK 2 99 F250 V8 Gas
Tk 3 98 Explorer 4.0 liter 4x4
Tk 4 98 Explorer 4.0 liter 4x4
Tk 5 96 Ford F250 Xcab long bed
Tk 6 97 Ford F250 Single Cab, 4x4 With 7.5 ft Fisher
Tr 1 - 16 ft Mowing trailer
Tr 2 - 12 ft dump trailer
Tr 3 - 10 ft utility trailer
Tr 4 - 12 ft Mowing trailer
Tr 5 - 18 ft Skid loader trailer
1992 Case 1840 Skid loader

Jason Rohrbaugh
Crew Cut Enterprises LLC.

Annapolis, Maryland
Reply With Quote
  #5  
Old 07-28-2006, 01:17 PM
Magna-Matic's Avatar
Magna-Matic Magna-Matic is offline
Sponsor
 
Join Date: Jul 2001
Location: Waldo, Wisconsin
Posts: 798
Hello CrewCut,

Our grinding wheels come the same way as any wheel. They do not come at an angle. However, because we approach the wheel at an angle they dress themselves to that angle providing you with a greater than 1" wide cutting surface. This increases performance NOT reduces. If you have more surface area cutting you will cut faster.

The reason we approch the wheel at an angle is to use a single direction motor FOR SAFETY, because dual direction motors are unsafe. Approaching at an angle allows us to do left and right handed blades with a single direction motor, AND there is NO LIMIT to the EDGE LENGTH of the blade. RBG forces you to buy a more and more expensive grinder if you have longer blade edges. Their design puts the motor in your way.

Magna-Matic is the only manufacturer of lawn mower blade sharpeners that provides you with an angle reference point. When you lower the grinding wheel to the work table - you will always produce a 30 degree angle on the blade, no matter what diameter the wheel is at.

With RBG you need to measure the blade angle between every blade, because of their adjustment, as the wheel wears the angle will change. Changing the angle on an RBG is also more difficult, you must loosen 2 wingnuts, then turn a crank, then tighten the wingnuts.

Magna-Matic is a single crank, and as mentioned before; as long as you keep the grinding wheel lowered to where it is almost contacting the work table - this is always 30 degrees.

Also keep in mind that we generally run at higher RPM than RBG and use grinding wheels matched to lawn mower blade steel, to cut much more quickly and cool. You do not require grinding wheel dressing tools with a Magna-Matic sharpener; where dressing tools are standard/required accessories for RGB.

Please review our instruction manuals online

http://www.magna-matic.com/support/p...tructions.html

Also review this design difference section of our website for more differences between conventional modified bench grinder designs VS Magna-Matic.

http://www.magna-matic.com/sharpener...ifference.html


Also note you can return our equipment in 30 days in a used condition if you don't like it for any reason - RBG does not take back used equipment, and neither do most of their dealers.

Let me know if you have any other questions or call me at 800-328-1110

Thank you,
__________________
Gerd Ferdinand Bauer II

Magna-Matic Corporation
Waldo WI USA
800-328-1110 (toll free USA & Canda)
920-564-2366 (PHONE)
gbauer2@magna-matic.com
www.magna-matic.com
www.magna-matic-direct.com
www.youtube.com/magnamaticcorp
Reply With Quote
  #6  
Old 07-28-2006, 01:18 PM
Magna-Matic's Avatar
Magna-Matic Magna-Matic is offline
Sponsor
 
Join Date: Jul 2001
Location: Waldo, Wisconsin
Posts: 798
Hello,

Any specials/discounts will be at EXPO 2006 in Louisville KY at our booth for show visitors only.

Thank you,
__________________
Gerd Ferdinand Bauer II

Magna-Matic Corporation
Waldo WI USA
800-328-1110 (toll free USA & Canda)
920-564-2366 (PHONE)
gbauer2@magna-matic.com
www.magna-matic.com
www.magna-matic-direct.com
www.youtube.com/magnamaticcorp
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:49 AM.


Our Links:  PlowSite - WeldingWeb - LawnCareSuccess - Everythinggreen - Lawnbusiness.net
Recommended Sites:  ContractorTalk.com

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
Lawnsite,  Plowsite, WeldingWeb, LawnCareSuccess, Everythinggreen, & Lawnbusiness.net are trademarks of Lawn Care Success, Inc

Page generated in 0.07318 seconds with 7 queries