Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 08-04-2006, 03:06 AM
yardie133 yardie133 is offline
LawnSite Member
 
Join Date: Aug 2006
Location: Orlando Fl.
Posts: 1
Removal of Transmission pulley Scag 36

My Scag 36, Model SW 36 13KA walk behind Lawnmower transmission is defective, I am trying to remove it to have it replaced but I cant figure out how the belt pulley is removed from the transmission shaft. I noticed an unusual nut on the pulley. Can someone assist with instructions how to remove this pulley. Your help will be appreciated. Thanks.
Reply With Quote
  #2  
Old 08-04-2006, 07:48 AM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,775
Some Peerless transmissions have a retaining ring on the bottom, Some have a retaining ring and a set screw together and some have a square headed set screw.
Use a wire brush and clean the end of the shaft then check for a retaining ring, Remove if equipped then remove which ever style set screw completely.
Spray with penetrating oil and let sit a few minutes, Use a pry bar to LIGHTLY apply a downward pressure on the edge of the pulley then using a drift punch in the center of the shaft tap with a hammer and it should slide off. You will probably need a helper and Remember light pressure, You don't want to bend the pulley.

If it won't come off this way, Remove the top cover then remove the retaining ring on the input shaft pinion gear then drive the whole shaft out the bottom then take it to a shop and let them press the shaft out of the pulley.
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:18 AM.

Page generated in 0.05932 seconds with 7 queries