Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 09-07-2006, 12:45 PM
cbmoore cbmoore is offline
LawnSite Member
 
Join Date: Jul 2004
Location: western NC
Posts: 19
JD 755 crawler loader

I have found a 1985 John Deere 755 loader with 4n1 bucket, hydrostatic drive, unknown hours.
Rebuilt motor 200hrs ago
rebuilt hydro motors 150hrs ago
Sprockets in decent shape, some rollers replaced
New teeth on bucket
minor leak on lift cylinder, bucket
New pins,bushings in tracks
Owner states that the chains,rails need to replaced(~4K) and the pins,bushings should not have been used(waste of time) by previous owner.
he is asking $12,500

I would like to know if changing the chains/rails is a difficult job, and how expensive? Can you just take a link out of the chains to remove the slack?

What would be a good price be on this size machine?
I will be clearing ~20acres of small pines, other softwoods(12" max. diameter)

Thanks,
Brian Moore
Reply With Quote
  #2  
Old 09-07-2006, 08:46 PM
ksss's Avatar
ksss ksss is online now
LawnSite Fanatic
 
Join Date: Jan 2003
Location: Rigby, Idaho
Posts: 6,969
You may consider renting or hiring some one with a Fecon type cutter head. The viability of that would depend on how thick the stand was, but you would not have to deal with near as much slash. Actually you would be left with nothing but mulch. If your just looking at buying the JD to do this one job this might be a better route. Especially if you end up putting a lot of money into the JD.
__________________
See us at www.kaiserskidsteer.com

Proudly running CASE and Takeuchi equipment.
Reply With Quote
  #3  
Old 09-07-2006, 10:13 PM
cbmoore cbmoore is offline
LawnSite Member
 
Join Date: Jul 2004
Location: western NC
Posts: 19
Thanks for the suggestions. Any idea what the average hourly rate is for that kind of set up?

Thanks,
Brian Moore
Reply With Quote
  #4  
Old 09-08-2006, 08:26 AM
AWJ Services AWJ Services is offline
LawnSite Platinum Member
 
Join Date: Jun 2004
Location: Ga
Posts: 4,259
The Grinders will leave most of the stump under the ground.

I personally would look for an older machine that has new undercarriage like a 450 or 550.

They are not as civilized as the newer machines but are cheap too work on and durable.

Also a Cat 943 are really good machines also.

It scares me at the 12,500 dollar price.
That is cheap .

Most older good loaders will set you back at least 20k if they have a good undercarriage.Even for the smaller 450 machines.

Remember if you buy a good machine it will virtually lose no value.
Use it and sell it after you are done.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:05 PM.

Page generated in 0.07090 seconds with 9 queries