Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 06-04-2001, 10:05 PM
75's Avatar
75 75 is offline
LawnSite Senior Member
 
Join Date: Feb 2001
Location: Orillia On (Canada)
Posts: 992
Clean that hardware...................

This is simply "general" info:

When putting stuff back together, I like to make sure the threads on bolts/screws etc are clean - dirty fasteners are not the most pleasant things to work with. The handiest tool I have found for that is a small bench grinder with a wire wheel - just remember those safety glasses!

And, I also try to make sure I put some "Never-Seize" on the bolts before re-assembly (unless the manual states otherwise, or LocTite is required instead) so that next time, disassembly hopefully won't be too frustrating. I wouldn't say that fasteners treated with the stuff NEVER sieze, but it does help!
__________________
Rob

'75 GMC "Blood, Sweat & Gear$"
Reply With Quote
  #2  
Old 06-05-2001, 10:46 PM
TFL TFL is offline
LawnSite Member
 
Join Date: Mar 2001
Location: Mt. Pleasant TX
Posts: 210
i just throw the hadware into a tub of deagreaser this takes the worst off.
Reply With Quote
  #3  
Old 06-08-2001, 10:18 PM
SMB's Avatar
SMB SMB is offline
LawnSite Senior Member
 
Join Date: Jun 2000
Location: Southwest VA
Posts: 323
Our mower came from the dealer with never sieze on the spindle bolts.
ALWAYS USE IT (never sieze) WHEN PUTTING PULLEYS ON ENGINE SHAFTS We have had several engines in the past with frozen pulleys, it ain't fun, you have to be very careful on most pulleys with a gear puller--or you'll warp them bad.
__________________
2004 F-350 4x4 6.0
2008 Bob-Cat ZT225
2001 Bob-Cat 48" WB
2000 Bob-Cat ZT219
Reply With Quote
  #4  
Old 06-10-2001, 08:56 AM
Sammy's Avatar
Sammy Sammy is offline
LawnSite Bronze Member
 
Join Date: Jul 2000
Location: Southern-Lower-Michigan
Posts: 1,734
I thought WD-40 was for washing parts off !
I always try to carry a can of it. You drop a bolt or nut in the dirt, grab the WD-40 and wash it off. I save the PB Blaster for the tough jobs.
__________________
Quality Is Good !
Reply With Quote
  #5  
Old 06-16-2001, 10:55 PM
plow kid's Avatar
plow kid plow kid is offline
Banned
 
Join Date: Nov 2000
Location: Toledo Ohio!!!
Posts: 516
Pb B'laster

I dont like that stuff, Zep 45 works better
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:11 AM.

Page generated in 0.08059 seconds with 7 queries