Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 09-23-2006, 12:02 PM
Jeff Voorhies Jeff Voorhies is offline
LawnSite Member
 
Join Date: Apr 2006
Location: Louisiana
Posts: 19
John Deere 727A Dimensions

Gentlemen:

Will be purchasing a 727A in the near future. I was wondering how wide these machines are with the discharge flap in the up position. My storage doors are 60 inches wide. Will it fit? The Deere website does not give dimensions with flap up only flap down and my dealership would have to measure one but have none in stock right now. Thanks
Reply With Quote
  #2  
Old 09-23-2006, 12:15 PM
Envy Lawn Service's Avatar
Envy Lawn Service Envy Lawn Service is offline
LawnSite Fanatic
 
Join Date: Sep 2002
Location: North Carolina
Posts: 11,042
Yeah it should... that's the 54" right?

Should run right around 55" or 56" with the chute up I'd think.
Some guys here own them and could measure for you though.
__________________
ENVY



"If you place a low value upon yourself, rest assured..... the world will not raise your price."

"The bitterness of poor quality lingers on long after the sweetness of cheap price is forgotten"
Reply With Quote
  #3  
Old 09-23-2006, 01:28 PM
traman's Avatar
traman traman is offline
LawnSite Senior Member
 
Join Date: Apr 2004
Location: new port richey , florida
Posts: 712
Dimensions
Wheel Base 1.22 m (48 in.)

Overall Height 1.82 m (71 in.)

Overall Length 1.98 m (78 in.)

Weight (717A) 513 kg (1132 lb)

Weight (727A) 524 kg (1155 lb)

Overall Width (717A 48-Inch Deck)
Chute Up 1.34 m (53 in.)

Chute Down 1.61 m (63.5 in.)

Overall Width (727A 54-Inch Deck)
Chute Up 1.52 m (60 in.)


Chute Down 1.79 m (70.5 in.)
__________________
2007 dodge hemi ram
6x13 enclosed trailer
2004 exmark lazerz hp52"23kohler
2004 exmark metro hp 36"15 kawasaki

echo srm 261 t
echo pas 230
edger,hedgetrimmer,brush cutter
echo srm 230 trimmer
echo pb 230 Ln blower
echo h c 150 hedge trimmer
echo pb 651 blower
echo pe 260 edger


an't that a kick in the head
Reply With Quote
  #4  
Old 09-23-2006, 04:23 PM
Power Chute Design's Avatar
Power Chute Design Power Chute Design is offline
LawnSite Senior Member
 
Join Date: Sep 2006
Location: Coralville, IA
Posts: 322
When I have my chute up and can just make a 60" gate with about one inch on either side.
Reply With Quote
  #5  
Old 09-23-2006, 06:35 PM
par69 par69 is offline
LawnSite Member
 
Join Date: Jul 2006
Location: Albany, Oregon
Posts: 50
check this out. If you what to go around the edge trimming make sure there is a over hang. Demo one first. I was going to buy a 727 but ended up with a 757 with MOD. Is amazing how small of places they will fit in.

http://manuals.deere.com/cceomview/O...put/Index.html
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:37 AM.

Page generated in 0.07010 seconds with 9 queries