Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 06-17-2001, 12:34 AM
Jason Pallas Jason Pallas is offline
LawnSite Bronze Member
 
Join Date: Jan 2001
Location: Grosse Pointe. MI
Posts: 1,321
Tranny Problems

I'm rebuilding a Spicer transmission (for Bunton / 5 speed) for about the 5th time in 2 years. The lower bearings keep failing on the input shaft - causing the pinion gear to wear and ultimately fail too. Does anyone have any experience here? I'm looking for a trick to help me keep these bearings from faliure (better lubrication!). I think it's just a bad design prob - but if any fellow Lawsnite Mechanics have any suggestions - i'd sure appreciate it. At present, the only change I'm thinking of making on this rebuild is to use a high grade synthetic grease (instead of the standard gen purpose stuff).
Reply With Quote
  #2  
Old 06-17-2001, 07:30 AM
David Haggerty David Haggerty is offline
LawnSite Member
 
Join Date: Jun 2001
Location: sw Ohio, Wilmington (the wettest place in the state)
Posts: 2,382
I think I've had the same problem on my Byers Gold. I'm trying to go on memory here so please bear with me.

On that lower bearing there are two "O" ring seals. One on the bottom, under the lower bearing, and one on top of that lower bearing.

It seemed to me that top "O" ring only kept the bearing from replenishing itself with grease from the gear case.
So when I replaced the bearing, I took the top "O" ring out. Never had any more trouble, and it's been a year.
This may not be what you're talking about at all but if it is, I hope this helps.

Dave Haggerty
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:57 AM.

Page generated in 0.06674 seconds with 9 queries